Are you looking quote for part C1B8? The Clarostat Sensors And Controls-manufactured component (CAGE Code: 12697) is documented under NSN 5985-00-810-9052 as Attenuator Variable. For the fastest quote, please complete our RFQ form with details about C1B8. We guarantee a response within 15 minutes
ASAP Components provides the verified C1B8, classified under INC 00838, FSG 59 Electrical and Electronic Equipment Components, FSC 5985 Antennas Waveguides and Related Equipment, NIIN 00-810-9052, and NCB 00. Submit your requirements today to receive immediate pricing and availability information.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5985-00-810-9052 Item Description: Attenuator Variable | 5985 | 008109052 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| C1b8 | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAFS | III APPLICATION DESIGN | AUDIO |
| AAQL | BODY STYLE | CYLINDRICAL W/REAR TERMINALS |
| ABHP | OVERALL LENGTH | 3.750 INCHES NOMINAL |
| ABKG | BOLT CIRCLE DIAMETER | 0.250 INCHES MINIMUM |
| ABVG | MOUNTING SLOT LENGTH | 4.750 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.250 INCHES NOMINAL |
| ABXD | BUSHING LENGTH | 0.375 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 1.375 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 2.375 INCHES NOMINAL |
| ADAV | OVERALL DIAMETER | 2.000 INCHES NOMINAL |
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | 0.375 INCHES NOMINAL |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | UNBALANCED LADDER |
| AJDB | POWER RATING | 10.0 WATTS AVERAGE |
| AKEJ | MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNC |
| ASYD | OVERALL ATTENUATION RANGE IN DECIBELS | +0.0/+24.0 |
| ASYF | ATTENUATION VARIATION METHOD | STEPPED |
| ASYG | STEP POSITION QUANTITY | 10 |
| ASYH | ATTENUATION PER STEP IN DECIBELS | 3.0 |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 1 THREADED BUSHING |
| BNGR | FREQUENCY RANGE | 0.000 KILOHERTZ MINIMUM AND 20.000 KILOHERTZ MAXIMUM |
| CGGK | MOUNTING THREAD QUANTITY | 20 PER INCH |
| CQTQ | ADJUSTMENT DEVICE TYPE AND QUANTITY | 1 SHAFT |
| CQYJ | MOUNTING FACILITY PATTERN | SIX POSITION CIRCULAR |
| CRSJ | SHAFT TYPE | ROUND |
| CRYY | MOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER | 0.250 INCHES |
| CTGG | IMPEDANCE RATING IN OHMS | 8.0 INPUT-OUTPUT |
| TTQY | TERMINAL TYPE AND QUANTITY | 6 TAB, SOLDER LUG |
| End Use : 21400 | Telecommunications equipment |
|---|---|
| Schedule B : 8529109000 (NAICS 334220) | Antenna & antenna reflectors of all kinds; parts suitable for use soley or principally w/ apparatus of heading 8525 to 8528, nesoi |
| SITC : 76493 | Parts of television receivers, radiobroadcast receivers, transmission apparatus for radio telephony, telegraphy, broadcasting or television etc. |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | U - Precious metal content is unknown |
| AAC | Y |
|---|---|
| Classification Control | U |
| MGMT_CTL | ------- |
| Quantity per pack | 1 |
| Repariability | |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Ea |
| ACC: | H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps) |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LTL: | W - Rating variable |
| NMFC: | 061700 - Elec appliances/instruments noi |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 658 - Electrical appliances, small |
|
Guaranteed on-time |
|
|
Customized and |
|
|
Over 5100 |
|
|
Complete Purchasing |
