Quote for D408-N-PPS-2.5K Clarostat Sensors And Controls Part with NSN 5905-01-526-3114

Part Number:  D408-N-PPS-2.5K
Alternate P/N:  D408NPPS2.5K
NIIN:  15263114
Item Name :  resistor variable n
CAGE Code:  12697
INC Code:  37405
Country:  USA
NCB Code:  01
FSG:  59 Electrical and Electronic Equipment Components
Last Updated:  05-23-2025

Are you looking quote for part D408-N-PPS-2.5K? The Clarostat Sensors And Controls-manufactured component (CAGE Code: 12697) is documented under NSN 5905-01-526-3114 as Resistor Variable N. For the fastest quote, please complete our RFQ form with details about D408-N-PPS-2.5K. We guarantee a response within 15 minutes

ASAP Components provides the verified D408-N-PPS-2.5K, classified under INC 37405, FSG 59 Electrical and Electronic Equipment Components, FSC 5905 Resistors, NIIN 01-526-3114, and NCB 01. Submit your requirements today to receive immediate pricing and availability information.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for D408-N-PPS-2.5K

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Characteristics Data of NSN 5905-01-526-3114, 5905015263114

MRCCriteriaCharacteristic
AEDXSHAFT STYLEROUND, SLOTTED
AEEASWITCH TYPEPUSH-PULL
AEFDACTUATOR TYPESINGLE SHAFT
AEGJSWITCH CONTACT ARRANGEMENTSINGLE POLE, DOUBLE THROW, THREE POSITIONS MAINTAINED
AEHTCENTER TO CENTER DISTANCE BETWEEN TERMINALS0.100 INCHES NOMINAL
AKPVMOUNTING FACILITY QUANTITY1
APXHTERMINAL LOCATIONLONGITUDINALLY POSITIONED ON THE CIRCUMFERENCE
AXGYMOUNTING METHODSLOT
CBBLFEATURES PROVIDEDSWITCH
CQCCELECTRICAL RESISTANCE PER SECTION2500.0 OHMS ALL SECTIONS
CQCMCENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL0.100 INCHES NOMINAL
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS0.5 HEAT SINK ALL SECTIONS
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0/+10.0 ALL SECTIONS
TTQYTERMINAL TYPE AND QUANTITY3 PIN
AAPNSECTION QUANTITY2
AAQLBODY STYLERECTANGULAR BUSHING MOUNTED
AARGRELIABILITY INDICATORNOT ESTABLISHED
ABJTTERMINAL LENGTH0.875 INCHES NOMINAL
ABTDMOUNTING SLOT WIDTH0.031 INCHES NOMINAL
ABWVSHAFT DIAMETER0.125 INCHES NOMINAL
ABXFSHAFT LENGTH0.750 INCHES NOMINAL
ADAPMOUNTING BUSHING LENGTH0.250 INCHES NOMINAL
ADAQBODY LENGTH1.062 INCHES NOMINAL
ADATBODY WIDTH0.500 INCHES NOMINAL
ADAUBODY HEIGHT0.500 INCHES NOMINAL
AAPNSECTION QUANTITY2
AAQLBODY STYLERECTANGULAR BUSHING MOUNTED
AARGRELIABILITY INDICATORNOT ESTABLISHED
ABJTTERMINAL LENGTH0.875 INCHES NOMINAL
ABTDMOUNTING SLOT WIDTH0.031 INCHES NOMINAL
ABWVSHAFT DIAMETER0.125 INCHES NOMINAL
ABXFSHAFT LENGTH0.750 INCHES NOMINAL
ADAPMOUNTING BUSHING LENGTH0.250 INCHES NOMINAL
ADAQBODY LENGTH1.062 INCHES NOMINAL
ADATBODY WIDTH0.500 INCHES NOMINAL
ADAUBODY HEIGHT0.500 INCHES NOMINAL
AEDXSHAFT STYLEROUND, SLOTTED
AEEASWITCH TYPEPUSH-PULL
AEFDACTUATOR TYPESINGLE SHAFT
AEGJSWITCH CONTACT ARRANGEMENTSINGLE POLE, DOUBLE THROW, THREE POSITIONS MAINTAINED
AEHTCENTER TO CENTER DISTANCE BETWEEN TERMINALS0.100 INCHES NOMINAL
AKPVMOUNTING FACILITY QUANTITY1
APXHTERMINAL LOCATIONLONGITUDINALLY POSITIONED ON THE CIRCUMFERENCE
AXGYMOUNTING METHODSLOT
CBBLFEATURES PROVIDEDSWITCH
CQCCELECTRICAL RESISTANCE PER SECTION2500.0 OHMS ALL SECTIONS
CQCMCENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL0.100 INCHES NOMINAL
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS0.5 HEAT SINK ALL SECTIONS
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0/+10.0 ALL SECTIONS
TTQYTERMINAL TYPE AND QUANTITY3 PIN

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8533400080 (NAICS 334416) Variable resistors, including potentiometers, nesoi
SITC : 77235 Variable electrical resistors (including reostats and potentiometers), n.E.S.

Identification

ADPE Represents items with no adp components
CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
ESD A - No known electrostatic discharge (esd) or electromagnetic interference (emi) sensitivity.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC A - Item does not contain precious metal.

USA Flag

We are proud to supply every branch of the United States military

Why Choose Us

Guaranteed on-time
Delivery

Customized and
User-friendly Database

Over 5100
Manufacturers

Complete Purchasing
Solutions

ASAP Semiconductor’s Certifications And Memberships



bottom to top