Quote for WRS1G040S103B Clarostat Sensors And Controls Part with NSN 5905-01-348-9960

Part Number:  WRS1G040S103B
NIIN:  13489960
Item Name :  resistor variable n
CAGE Code:  12697
INC Code:  37405
Country:  USA
NCB Code:  01
FSG:  59 Electrical and Electronic Equipment Components
Last Updated:  05-21-2025

Are you looking quote for part WRS1G040S103B? The Clarostat Sensors And Controls-manufactured component (CAGE Code: 12697) is documented under NSN 5905-01-348-9960 as Resistor Variable N. For the fastest quote, please complete our RFQ form with details about WRS1G040S103B. We guarantee a response within 15 minutes

ASAP Components provides the verified WRS1G040S103B, classified under INC 37405, FSG 59 Electrical and Electronic Equipment Components, FSC 5905 Resistors, NIIN 01-348-9960, and NCB 01. Submit your requirements today to receive immediate pricing and availability information.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for WRS1G040S103B

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number WRS1G040S103B with NSN 5905-01-348-9960, 5905013489960

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-01-348-9960

Item Description:

Resistor Variable N

59050134899600N
CIICHCCESDPMICCriticalityENAC
U A
Part NumberISCRNVCRNCCHCCMSDSSADC
Wrs1g040s103b595

Characteristics Data of NSN 5905-01-348-9960, 5905013489960

MRCCriteriaCharacteristic
AAQLBODY STYLECYLINDRICAL BUSHING MOUNTED
AARGRELIABILITY INDICATORNOT ESTABLISHED
ABPMBODY DIAMETER0.500 INCHES NOMINAL
ABXFSHAFT LENGTH0.625 INCHES NOMINAL
ADAPMOUNTING BUSHING LENGTH0.250 INCHES NOMINAL
AEDXSHAFT STYLEROUND, SLOTTED
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION292.0 MINIMUM AND 298.0 MAXIMUM
AEFKMAXIMUM STARTING TORQUE13.00 INCH-OUNCES
AXGYMOUNTING METHODSTANDARD BUSHING
CBBLFEATURES PROVIDEDPANEL SEAL AND SWITCH
CQCCELECTRICAL RESISTANCE PER SECTION10.0 KILOHMS SINGLE SECTION
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG255.0 MINIMUM AND 265.0 MAXIMUM
CQDBRESISTANCE TEMP CHARACTERISTIC RANGE PER SECTION IN PERCENT+0.0 TO 5.0 -55 DEG CELSIUS SINGLE SECTION AND +0.0 TO 4.0 -40 DEG CELSIUS SINGLE SECTION AND +0.0 TO 2.0 0 DEG CELSIUS SINGLE SECTION AND -2.5 TO 2.5 85 DEG CELSIUS SINGLE SECTION AND -3.0 TO 3.0 105 DEG CELSIUS SINGLE SECTION AND -4.0 TO
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS0.5 FREE AIR SINGLE SECTION
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 SINGLE SECTION
CSDKSWITCH CURRENT TYPE AND RATING IN AMPS1.000 AC
TESTTEST DATA DOCUMENT37695-228092 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWI
TTQYTERMINAL TYPE AND QUANTITY5 TAB, SOLDER LUG
AEFLMAXIMUM RUNNING TORQUE13.00 INCH-OUNCES
AJYNSCREW THREAD DIAMETER0.250 INCHES NOMINAL
APXHTERMINAL LOCATIONREAR-BOTTOM
CBMEIII CUBIC MEASURE0.159 CUBIC INCHES
FEATSPECIAL FEATURESTERMINAL LUGS EXITING THE SIDE OF THE PART BODY RATHER THAN THE END
AAPNSECTION QUANTITY1
AEDZSHAFT BEARING TYPESLEEVE
AEFDACTUATOR TYPESINGLE SHAFT
AEFNNONTURN DEVICE LOCATIONAT 10'30 OCLOCK
AEGHSWITCH OPERATING POSITIONSTART OF ROTATION
AEGJSWITCH CONTACT ARRANGEMENTSINGLE POLE, SINGLE THROW, NORMALLY OPEN, BOTH POSITIONS MAINTAINED
AFJNIII FRAGILITY FACTORMODERATELY RUGGED
AGAVIII END ITEM IDENTIFICATION5895-01-166-6949 DISPLAY BOARD,COMBAT INFORMATION CENTRAL
AJYQSCREW THREAD QUANTITY PER INCH32.0
ABWVSHAFT DIAMETER0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM
ADAQBODY LENGTH0.812 INCHES MAXIMUM
AEEASWITCH TYPEROTARY
AEEDSWITCH VOLTAGE RATING IN VOLTS125.0
AEFMMAXIMUM STOP TORQUE32.00 INCH-OUNCES
AEFPNONTURN DEVICE RADIUS0.245 INCHES NOMINAL
AJYPSCREW THREAD SERIES DESIGNATORUNEF
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER120.0 SINGLE SECTION
CRSXACTUATOR TRAVEL CONTROL FEATURESTOPS
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER70.0 SINGLE SECTION

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8533400080 (NAICS 334416) Variable resistors, including potentiometers, nesoi
SITC : 77235 Variable electrical resistors (including reostats and potentiometers), n.E.S.

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC V
Classification Control U
MGMT_CTL Q2200x-
Quantity per pack No qup
Repariability This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 062960 - Reostats/parts noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

USA Flag

We are proud to supply every branch of the United States military

Why Choose Us

Guaranteed on-time
Delivery

Customized and
User-friendly Database

Over 5100
Manufacturers

Complete Purchasing
Solutions

ASAP Semiconductor’s Certifications And Memberships



bottom to top