Quote for CM46339-2 Clarostat Sensors And Controls Part with NSN 5905-01-346-0759

Part Number:  CM46339-2
Alternate P/N:  CM463392
NIIN:  13460759
Item Name :  resistor variable n
CAGE Code:  12697
INC Code:  37405
Country:  USA
NCB Code:  01
FSG:  59 Electrical and Electronic Equipment Components
Last Updated:  05-21-2025

Are you looking quote for part CM46339-2? The Clarostat Sensors And Controls-manufactured component (CAGE Code: 12697) is documented under NSN 5905-01-346-0759 as Resistor Variable N. For the fastest quote, please complete our RFQ form with details about CM46339-2. We guarantee a response within 15 minutes

ASAP Components provides the verified CM46339-2, classified under INC 37405, FSG 59 Electrical and Electronic Equipment Components, FSC 5905 Resistors, NIIN 01-346-0759, and NCB 01. Submit your requirements today to receive immediate pricing and availability information.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for CM46339-2

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number CM46339-2 with NSN 5905-01-346-0759, 5905013460759

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-01-346-0759

Item PartTypeName:

RESISTOR,VARIABLE,NONWIRE WOUND

59050134607590NB
CIICHCCESDPMICCriticalityENAC
UBA
Part NumberISCRNVCRNCCHCCMSDSSADC
05A208-02523

Characteristics Data of NSN 5905-01-346-0759, 5905013460759

MRCCriteriaCharacteristic
ADAUBODY HEIGHT0.875 INCHES MAXIMUM
AEFMMAXIMUM STOP TORQUE64.00 INCH-OUNCES
CBMECUBIC MEASURE0.478 CUBIC INCHES
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG290.0 MINIMUM AND 300.0 MAXIMUM
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 SINGLE SECTION
CRSXACTUATOR TRAVEL CONTROL FEATURESTOPS
AARGRELIABILITY INDICATORNOT ESTABLISHED
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION290.0 MINIMUM AND 300.0 MAXIMUM
AEFPNONTURN DEVICE RADIUS0.521 INCHES MINIMUM AND 0.541 INCHES MAXIMUM
AJYPSCREW THREAD SERIES DESIGNATORUNEF
CBBLFEATURES PROVIDEDHUMIDITY PROOF
CQCCELECTRICAL RESISTANCE PER SECTION5.0 KILOHMS SINGLE SECTION
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER120.0 SINGLE SECTION
CQTMTERMINAL LOCATIONLOWER ADJACENT SIDE TWO ROWS
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS0.5 FREE AIR SINGLE SECTION
CXHNSHAFT BEARING TYPESLEEVE
ABNCFLAT HEIGHT0.208 INCHES MINIMUM AND 0.228 INCHES MAXIMUM
ABWVSHAFT DIAMETER0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
ABXFSHAFT LENGTH0.870 INCHES MINIMUM AND 0.930 INCHES MAXIMUM
ADAPMOUNTING BUSHING LENGTH0.250 INCHES MAXIMUM
ADAQBODY LENGTH0.625 INCHES MAXIMUM
AJYNSCREW THREAD DIAMETER0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
AJYQSCREW THREAD QUANTITY PER INCH32.0
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER40.0 SINGLE SECTION
AAPNSECTION QUANTITY1
AAQLBODY STYLERECTANGULAR BUSHING MOUNTED
ABNBFIRST FLAT LENGTH0.625 INCHES MAXIMUM
ADATBODY WIDTH0.875 INCHES MAXIMUM
AEDXSHAFT STYLEROUND,FLATTED
AEFDACTUATOR TYPESINGLE SHAFT
AFJNFRAGILITY FACTORMODERATELY RUGGED
AXGYMOUNTING METHODSTANDARD BUSHING
CQPHDEVICE DESIGN TYPENONTURN AT 9 OCLOCK
TTQYTERMINAL TYPE AND QUANTITY3 TAB,SOLDER LUG

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8533400080 (NAICS 334416) Variable resistors, including potentiometers, nesoi
SITC : 77235 Variable electrical resistors (including reostats and potentiometers), n.E.S.

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
ESD B - Represents items with esd sensitivity.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC Z
Classification Control U
MGMT_CTL Sf9eh-n
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 062960 - Reostats/parts noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

USA Flag

We are proud to supply every branch of the United States military

Why Choose Us

Guaranteed on-time
Delivery

Customized and
User-friendly Database

Over 5100
Manufacturers

Complete Purchasing
Solutions

ASAP Semiconductor’s Certifications And Memberships



bottom to top