Quote for 311-2315-00 Clarostat Sensors And Controls Part with NSN 5905-01-318-8047

Part Number:  311-2315-00
Alternate P/N:  311231500
NIIN:  13188047
Item Name :  resistor variable n
CAGE Code:  12697
INC Code:  37405
Country:  USA
NCB Code:  01
FSG:  59 Electrical and Electronic Equipment Components
Last Updated:  05-22-2025

Are you looking quote for part 311-2315-00? The Clarostat Sensors And Controls-manufactured component (CAGE Code: 12697) is documented under NSN 5905-01-318-8047 as Resistor Variable N. For the fastest quote, please complete our RFQ form with details about 311-2315-00. We guarantee a response within 15 minutes

ASAP Components provides the verified 311-2315-00, classified under INC 37405, FSG 59 Electrical and Electronic Equipment Components, FSC 5905 Resistors, NIIN 01-318-8047, and NCB 01. Submit your requirements today to receive immediate pricing and availability information.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 311-2315-00

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number 311-2315-00 with NSN 5905-01-318-8047, 5905013188047

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-01-318-8047

Item PartTypeName:

RESISTOR,VARIABLE,NONWIRE WOUND

59050131880470NB
CIICHCCESDPMICCriticalityENAC
UBA
Part NumberISCRNVCRNCCHCCMSDSSADC
311-2315-00C23

Characteristics Data of NSN 5905-01-318-8047, 5905013188047

MRCCriteriaCharacteristic
AEFLMAXIMUM RUNNING TORQUE1.00 INCH-OUNCES
AJYPSCREW THREAD SERIES DESIGNATORUNEF
CBBLFEATURES PROVIDEDHUMIDITY PROOF
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 ALL SECTIONS
AAPNSECTION QUANTITY2
ABWVSHAFT DIAMETER0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM
ABXFSHAFT LENGTH0.844 INCHES MINIMUM AND 0.906 INCHES MAXIMUM
ADAQBODY LENGTH0.781 INCHES MINIMUM AND 0.812 INCHES MAXIMUM
ADATBODY WIDTH0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM
ADAUBODY HEIGHT0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM
AEDXSHAFT STYLEROUND,STEPPED
AEFKMAXIMUM STARTING TORQUE4.50 INCH-OUNCES
CQTMTERMINAL LOCATIONLOWER ADJACENT SIDE SINGLE ROW
CXHNSHAFT BEARING TYPESLEEVE
AAQLBODY STYLERECTANGULAR BUSHING MOUNTED
AARGRELIABILITY INDICATORNOT ESTABLISHED
AEFDACTUATOR TYPEDUAL CONCENTRIC
AEFPNONTURN DEVICE RADIUS0.235 INCHES MINIMUM AND 0.266 INCHES MAXIMUM
AFJNFRAGILITY FACTORMODERATELY RUGGED
AGQLUNDERCUT LENGTH0.250 INCHES NOMINAL
AJYQSCREW THREAD QUANTITY PER INCH32.0
CQCCELECTRICAL RESISTANCE PER SECTION10.0 KILOHMS 1ST SECTION AND 10.0 KILOHMS 2ND SECTION
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS0.5 FREE AIR ALL SECTIONS
TTQYTERMINAL TYPE AND QUANTITY6 WIRE LOOP
ABPAUNDERCUT DIAMETER0.077 INCHES MINIMUM AND 0.079 INCHES MAXIMUM
ADAPMOUNTING BUSHING LENGTH0.244 INCHES MINIMUM AND 0.266 INCHES MAXIMUM
AGAVEND ITEM IDENTIFICATION6625-01-027-0265 GENERATOR,SWEEP
AJYNSCREW THREAD DIAMETER0.250 INCHES NOMINAL
AXGYMOUNTING METHODSTANDARD BUSHING
CBMECUBIC MEASURE0.229 CUBIC INCHES
CQPHDEVICE DESIGN TYPENONTURN AT 9 OCLOCK
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER70.0 ALL SECTIONS

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8533400080 (NAICS 334416) Variable resistors, including potentiometers, nesoi
SITC : 77235 Variable electrical resistors (including reostats and potentiometers), n.E.S.

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
ESD B - Represents items with esd sensitivity.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC Z
Classification Control U
MGMT_CTL Sf9eh-n
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 062960 - Reostats/parts noi
SHC: 9 - Other or no special handling required (sh)
TCC: 3 - Electrostatic sensitive device (esd)
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

USA Flag

We are proud to supply every branch of the United States military

Why Choose Us

Guaranteed on-time
Delivery

Customized and
User-friendly Database

Over 5100
Manufacturers

Complete Purchasing
Solutions

ASAP Semiconductor’s Certifications And Memberships



bottom to top