Quote for W8778 Clarostat Sensors And Controls Part with NSN 5905-01-297-6774

Part Number:  W8778
NIIN:  12976774
Item Name :  resistor variable n
CAGE Code:  12697
INC Code:  37405
Country:  USA
NCB Code:  01
FSG:  59 Electrical and Electronic Equipment Components
Last Updated:  05-23-2025

Are you looking quote for part W8778? The Clarostat Sensors And Controls-manufactured component (CAGE Code: 12697) is documented under NSN 5905-01-297-6774 as Resistor Variable N. For the fastest quote, please complete our RFQ form with details about W8778. We guarantee a response within 15 minutes

ASAP Components provides the verified W8778, classified under INC 37405, FSG 59 Electrical and Electronic Equipment Components, FSC 5905 Resistors, NIIN 01-297-6774, and NCB 01. Submit your requirements today to receive immediate pricing and availability information.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for W8778

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number W8778 with NSN 5905-01-297-6774, 5905012976774

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-01-297-6774

Item PartTypeName:

RESISTOR,VARIABLE,NONWIRE WOUND

59050129767740NB
CIICHCCESDPMICCriticalityENAC
UBA
Part NumberISCRNVCRNCCHCCMSDSSADC
311-1482-01C23

Characteristics Data of NSN 5905-01-297-6774, 5905012976774

MRCCriteriaCharacteristic
ABHPOVERALL LENGTH1.261 INCHES MAXIMUM
ABXFSHAFT LENGTH0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM
ADAQBODY LENGTH0.489 INCHES MAXIMUM
AEFPNONTURN DEVICE RADIUS0.258 INCHES NOMINAL
AEHTCENTER TO CENTER DISTANCE BETWEEN TERMINALS0.190 INCHES MINIMUM AND 0.210 INCHES MAXIMUM
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER40.0 SINGLE SECTION
ABPMBODY DIAMETER0.516 INCHES MAXIMUM
ADAVOVERALL DIAMETER0.516 INCHES MAXIMUM
AGAVEND ITEM IDENTIFICATION6625-01-159-3106 OSCILLOSCOPE
AAPNSECTION QUANTITY1
AAQLBODY STYLECYLINDRICAL BUSHING MOUNTED
AARGRELIABILITY INDICATORNOT ESTABLISHED
ABWVSHAFT DIAMETER0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM
AEFDACTUATOR TYPESINGLE SHAFT
AEFKMAXIMUM STARTING TORQUE3.00 INCH-OUNCES
AEFLMAXIMUM RUNNING TORQUE3.00 INCH-OUNCES
AFJNFRAGILITY FACTORMODERATELY RUGGED
AJYNSCREW THREAD DIAMETER0.250 INCHES NOMINAL
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER120.0 SINGLE SECTION
CQPHDEVICE DESIGN TYPENONTURN AT 10 OCLOCK
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS0.5 FREE AIR SINGLE SECTION
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-20.0 TO 20.0 SINGLE SECTION
CXHNSHAFT BEARING TYPESLEEVE
ABJTTERMINAL LENGTH0.084 INCHES MINIMUM AND 0.116 INCHES MAXIMUM
ADAPMOUNTING BUSHING LENGTH0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM
AEDXSHAFT STYLEROUND,SLOTTED
AJYPSCREW THREAD SERIES DESIGNATORUNEF
AJYQSCREW THREAD QUANTITY PER INCH32.0
AXGYMOUNTING METHODSTANDARD BUSHING
CQCCELECTRICAL RESISTANCE PER SECTION5.0 KILOHMS SINGLE SECTION
CQCMCENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM
CQTMTERMINAL LOCATIONREAR END
TTQYTERMINAL TYPE AND QUANTITY3 PIN

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8533400080 (NAICS 334416) Variable resistors, including potentiometers, nesoi
SITC : 77235 Variable electrical resistors (including reostats and potentiometers), n.E.S.

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
ESD B - Represents items with esd sensitivity.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC Z
Classification Control U
MGMT_CTL Q2200x-
Quantity per pack 1
Repariability This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 062960 - Reostats/parts noi
SHC: 9 - Other or no special handling required (sh)
TCC: 3 - Electrostatic sensitive device (esd)
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

USA Flag

We are proud to supply every branch of the United States military

Why Choose Us

Guaranteed on-time
Delivery

Customized and
User-friendly Database

Over 5100
Manufacturers

Complete Purchasing
Solutions

ASAP Semiconductor’s Certifications And Memberships



bottom to top