Quote for WRS1N048F104U Clarostat Sensors And Controls Part with NSN 5905-01-296-7521

Part Number:  WRS1N048F104U
NIIN:  12967521
Item Name :  resistor variable n
CAGE Code:  12697
INC Code:  37405
Country:  USA
NCB Code:  01
FSG:  59 Electrical and Electronic Equipment Components
Last Updated:  05-26-2025

Are you looking quote for part WRS1N048F104U? The Clarostat Sensors And Controls-manufactured component (CAGE Code: 12697) is documented under NSN 5905-01-296-7521 as Resistor Variable N. For the fastest quote, please complete our RFQ form with details about WRS1N048F104U. We guarantee a response within 15 minutes

ASAP Components provides the verified WRS1N048F104U, classified under INC 37405, FSG 59 Electrical and Electronic Equipment Components, FSC 5905 Resistors, NIIN 01-296-7521, and NCB 01. Submit your requirements today to receive immediate pricing and availability information.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for WRS1N048F104U

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number WRS1N048F104U with NSN 5905-01-296-7521, 5905012967521

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-01-296-7521

Item PartTypeName:

RESISTOR,VARIABLE,NONWIRE WOUND

5905012967521NA
CIICHCCESDPMICCriticalityENAC
AA
Part NumberISCRNVCRNCCHCCMSDSSADC
1809620223

Characteristics Data of NSN 5905-01-296-7521, 5905012967521

MRCCriteriaCharacteristic
AAPNSECTION QUANTITY1
AARGRELIABILITY INDICATORNOT ESTABLISHED
ABWVSHAFT DIAMETER0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM
AEDXSHAFT STYLEROUND,FLATTED
AEFDACTUATOR TYPESINGLE SHAFT
AFJNFRAGILITY FACTORMODERATELY RUGGED
ARNHOPERATING POSITIONSTART OF ROTATION
CBBLFEATURES PROVIDEDHUMIDITY PROOF AND SWITCH
CBMECUBIC MEASURE0.005 CUBIC INCHES
CQCCELECTRICAL RESISTANCE PER SECTION100.0 KILOHMS SINGLE SECTION
CQPHDEVICE DESIGN TYPENONTURN AT 10 OCLOCK
CQTMTERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
CRSXACTUATOR TRAVEL CONTROL FEATURESTOPS
TTQYTERMINAL TYPE AND QUANTITY3 TAB,SOLDER LUG
AAQLBODY STYLECYLINDRICAL BUSHING MOUNTED
ABNCFLAT HEIGHT0.092 INCHES MINIMUM AND 0.096 INCHES MAXIMUM
ADAPMOUNTING BUSHING LENGTH0.375 INCHES NOMINAL
AEEASWITCH TYPEROTARY
AEEDSWITCH VOLTAGE RATING IN VOLTS125.0
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION290.0 MINIMUM AND 300.0 MAXIMUM
AEFKMAXIMUM STARTING TORQUE13.00 INCH-OUNCES
AEFLMAXIMUM RUNNING TORQUE13.00 INCH-OUNCES
AGAVEND ITEM IDENTIFICATIONAN-APN-59E
TESTTEST DATA DOCUMENT03956-1809620 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW
ABNBFIRST FLAT LENGTH0.250 INCHES NOMINAL
ABPMBODY DIAMETER0.500 INCHES NOMINAL
ADAQBODY LENGTH0.812 INCHES MAXIMUM
AEGJSWITCH CONTACT ARRANGEMENTSINGLE POLE,SINGLE THROW,NORMALLY OPEN,BOTH POSITIONS MAINTAINED
AJYNSCREW THREAD DIAMETER0.250 INCHES NOMINAL
AJYPSCREW THREAD SERIES DESIGNATORUNEF
AJYQSCREW THREAD QUANTITY PER INCH32.0
AXGYMOUNTING METHODSTANDARD BUSHING
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG290.0 MINIMUM AND 300.0 MAXIMUM
CQDBRESISTANCE TEMP CHARACTERISTIC RANGE PER SECTION IN PERCENT0.0 TO 8.0-55 DEG CELSIUS SINGLE SECTION AND 0.0 TO 4.0-25 DEG CELSIUS SINGLE SECTION AND-3.0 TO 3.0 85 DEG CELSIUS SINGLE SECTION AND 0.0 TO 6.0 120 DEG CELSIUS SINGLE SECTION
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER100.0 SINGLE SECTION
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 SINGLE SECTION
CSDKSWITCH CURRENT TYPE AND RATING IN AMPS1.000 AC
ABXFSHAFT LENGTH0.750 INCHES NOMINAL
AEFMMAXIMUM STOP TORQUE32.00 INCH-OUNCES
AEFPNONTURN DEVICE RADIUS0.250 INCHES NOMINAL
AEGDMECHANICAL BACKLASH IN DEG ANGULAR ROTATION3.0
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS0.5 FREE AIR SINGLE SECTION
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER70.0 SINGLE SECTION
CXHNSHAFT BEARING TYPEBEARING

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8533400080 (NAICS 334416) Variable resistors, including potentiometers, nesoi
SITC : 77235 Variable electrical resistors (including reostats and potentiometers), n.E.S.

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC Y
Classification Control U
MGMT_CTL -------
Quantity per pack No qup
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 062960 - Reostats/parts noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

USA Flag

We are proud to supply every branch of the United States military

Why Choose Us

Guaranteed on-time
Delivery

Customized and
User-friendly Database

Over 5100
Manufacturers

Complete Purchasing
Solutions

ASAP Semiconductor’s Certifications And Memberships



bottom to top