Quote for RP251U Clarostat Sensors And Controls Part with NSN 5905-00-836-8580

Part Number:  RP251U
NIIN:  8368580
Item Name :  resistor variable n
CAGE Code:  12697
INC Code:  37405
Country:  USA
NCB Code:  00
FSG:  59 Electrical and Electronic Equipment Components
Last Updated:  05-24-2025

Are you looking quote for part RP251U? The Clarostat Sensors And Controls-manufactured component (CAGE Code: 12697) is documented under NSN 5905-00-836-8580 as Resistor Variable N. For the fastest quote, please complete our RFQ form with details about RP251U. We guarantee a response within 15 minutes

ASAP Components provides the verified RP251U, classified under INC 37405, FSG 59 Electrical and Electronic Equipment Components, FSC 5905 Resistors, NIIN 00-836-8580, and NCB 00. Submit your requirements today to receive immediate pricing and availability information.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for RP251U

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number RP251U with NSN 5905-00-836-8580, 5905008368580

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-00-836-8580

Item PartTypeName:

RESISTOR,VARIABLE,NONWIRE WOUND

59050083685800N
CIICHCCESDPMICCriticalityENAC
U U
Part NumberISCRNVCRNCCHCCMSDSSADC
363-5124-1595

Characteristics Data of NSN 5905-00-836-8580, 5905008368580

MRCCriteriaCharacteristic
AEFLMAXIMUM RUNNING TORQUE8.00 INCH-OUNCES
CQTMTERMINAL LOCATIONLOWER ADJACENT SIDE TWO ROWS
AAPNSECTION QUANTITY1
AAQLBODY STYLERECTANGULAR
AARGRELIABILITY INDICATORNOT ESTABLISHED
ABHPOVERALL LENGTH1.375 INCHES NOMINAL
ABJTTERMINAL LENGTH0.594 INCHES NOMINAL
ABKWOVERALL HEIGHT0.953 INCHES NOMINAL
ABMKOVERALL WIDTH0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM
ABWVSHAFT DIAMETER0.125 INCHES NOMINAL
ABXFSHAFT LENGTH0.125 INCHES NOMINAL
ADAQBODY LENGTH1.234 INCHES MINIMUM AND 1.266 INCHES MAXIMUM
ADATBODY WIDTH0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM
ADAUBODY HEIGHT0.359 INCHES NOMINAL
AEDXSHAFT STYLEROUND,SLOTTED
AEFDACTUATOR TYPESINGLE SHAFT
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION9000.0 NOMINAL
AEFKMAXIMUM STARTING TORQUE8.00 INCH-OUNCES
AEHTCENTER TO CENTER DISTANCE BETWEEN TERMINALS0.700 INCHES NOMINAL
AXGYMOUNTING METHODTERMINAL
AYQRCENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS0.100 INCHES NOMINAL
CQCCELECTRICAL RESISTANCE PER SECTION250.0 OHMS SINGLE SECTION
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG9000.0 NOMINAL
CQCMCENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL0.300 INCHES NOMINAL
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER125.0 SINGLE SECTION
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS0.25 FREE AIR SINGLE SECTION
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 SINGLE SECTION
CRSXACTUATOR TRAVEL CONTROL FEATURECLUTCH
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER70.0 SINGLE SECTION
CXHNSHAFT BEARING TYPESLEEVE
TTQYTERMINAL TYPE AND QUANTITY3 PIN

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8533400080 (NAICS 334416) Variable resistors, including potentiometers, nesoi
SITC : 77235 Variable electrical resistors (including reostats and potentiometers), n.E.S.

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC U - Precious metal content is unknown

NSN Management Codes

AAC J
Classification Control U
MGMT_CTL Q2200x-
Quantity per pack 1
Repariability Item requires special handling or condemnation procedures for specific reasons, such as precious metal content, high dollar value, critical material, or hazardous materiel. refer to appropriate manuals or directives for specific instructions.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 062960 - Reostats/parts noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

USA Flag

We are proud to supply every branch of the United States military

Why Choose Us

Guaranteed on-time
Delivery

Customized and
User-friendly Database

Over 5100
Manufacturers

Complete Purchasing
Solutions

ASAP Semiconductor’s Certifications And Memberships



bottom to top