Quote for 2602818-1 Clarostat Sensors And Controls Part with NSN 5905-00-352-7147

Part Number:  2602818-1
Alternate P/N:  26028181
NIIN:  3527147
Item Name :  resistor variable n
CAGE Code:  12697
INC Code:  37405
Country:  USA
NCB Code:  00
FSG:  59 Electrical and Electronic Equipment Components
Last Updated:  05-21-2025

Are you looking quote for part 2602818-1? The Clarostat Sensors And Controls-manufactured component (CAGE Code: 12697) is documented under NSN 5905-00-352-7147 as Resistor Variable N. For the fastest quote, please complete our RFQ form with details about 2602818-1. We guarantee a response within 15 minutes

ASAP Components provides the verified 2602818-1, classified under INC 37405, FSG 59 Electrical and Electronic Equipment Components, FSC 5905 Resistors, NIIN 00-352-7147, and NCB 00. Submit your requirements today to receive immediate pricing and availability information.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 2602818-1

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number 2602818-1 with NSN 5905-00-352-7147, 5905003527147

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-00-352-7147

Item PartTypeName:

RESISTOR,VARIABLE,NONWIRE WOUND

59050035271470NB
CIICHCCESDPMICCriticalityENAC
UBU
Part NumberISCRNVCRNCCHCCMSDSSADC
2602521-1295

Characteristics Data of NSN 5905-00-352-7147, 5905003527147

MRCCriteriaCharacteristic
AAPNSECTION QUANTITY1
AAQLBODY STYLECYLINDRICAL BUSHING MOUNTED
AARGRELIABILITY INDICATORNOT ESTABLISHED
ABPMBODY DIAMETER1.094 INCHES NOMINAL
ABWVSHAFT DIAMETER0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM
ABXFSHAFT LENGTH0.844 INCHES MINIMUM AND 0.906 INCHES MAXIMUM
ADAPMOUNTING BUSHING LENGTH0.360 INCHES MINIMUM AND 0.432 INCHES MAXIMUM
ADAQBODY LENGTH0.719 INCHES MINIMUM AND 0.969 INCHES MAXIMUM
AEDXSHAFT STYLEROUND,SLOTTED
AEEASWITCH TYPEROTARY
AEEDSWITCH VOLTAGE RATING IN VOLTS28.0
AEFDACTUATOR TYPESINGLE SHAFT
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION320.0 MAXIMUM
AEFKMAXIMUM STARTING TORQUE6.00 INCH-OUNCES
AEFLMAXIMUM RUNNING TORQUE6.00 INCH-OUNCES
AEFMMAXIMUM STOP TORQUE128.00 INCH-OUNCES
AEFPNONTURN DEVICE RADIUS0.515 INCHES MINIMUM AND 0.547 INCHES MAXIMUM
AEGJSWITCH CONTACT ARRANGEMENTSINGLE POLE,DOUBLE THROW,THREE POSITIONS MAINTAINED
AJYNSCREW THREAD DIAMETER0.375 INCHES NOMINAL
AJYPSCREW THREAD SERIES DESIGNATORUNEF
AJYQSCREW THREAD QUANTITY PER INCH32.0
ARNHOPERATING POSITIONSTART OF ROTATION
AXGYMOUNTING METHODSTANDARD BUSHING
CBBLFEATURES PROVIDEDPANEL SEAL AND SHAFT SEAL AND SWITCH
CQCCELECTRICAL RESISTANCE PER SECTION5.0 KILOHMS SINGLE SECTION
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG320.0 MAXIMUM
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER120.0 SINGLE SECTION
CQPHDEVICE DESIGN TYPENONTURN AT 9 OCLOCK
CQTMTERMINAL LOCATIONREAR-BOTTOM
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS1.0 FREE AIR SINGLE SECTION
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 SINGLE SECTION
CRSXACTUATOR TRAVEL CONTROL FEATURESTOPS
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER70.0 SINGLE SECTION
CSDKSWITCH CURRENT TYPE AND RATING IN AMPS1.500 DC
TTQYTERMINAL TYPE AND QUANTITY6 TAB,SOLDER LUG

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8533400080 (NAICS 334416) Variable resistors, including potentiometers, nesoi
SITC : 77235 Variable electrical resistors (including reostats and potentiometers), n.E.S.

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
ESD B - Represents items with esd sensitivity.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC U - Precious metal content is unknown

NSN Management Codes

AAC Z
Classification Control U
MGMT_CTL Sf9eh-n
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LCL: P - 77.5
LTL: P - 77.5
NMFC: 062960 - Reostats/parts noi
SHC: Z - Other or no special handling required (sh)
TCC: 3 - Electrostatic sensitive device (esd)
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

USA Flag

We are proud to supply every branch of the United States military

Why Choose Us

Guaranteed on-time
Delivery

Customized and
User-friendly Database

Over 5100
Manufacturers

Complete Purchasing
Solutions

ASAP Semiconductor’s Certifications And Memberships



bottom to top