| MRC | Criteria | Characteristic |
|---|
| AAJD | THREAD CLASS | 3A" |
| AAJF | THREAD DIRECTION | RIGHT-HAND" |
| AASA | THREAD LENGTH | 0.469 INCHES NOMINAL" |
| AASB | FASTENER LENGTH | 1.432 INCHES NOMINAL" |
| AASK | HEAD STYLE | FILLISTER COUNTERSUNK" |
| AASL | HEAD DIAMETER | 0.389 INCHES MINIMUM AND 0.394 INCHES MAXIMUM" |
| AASU | HEAD HEIGHT | 0.070 INCHES MINIMUM AND 0.074 INCHES MAXIMUM" |
| AAUR | GRIP DIAMETER | 0.248 INCHES MINIMUM AND 0.249 INCHES MAXIMUM" |
| ABQZ | INTERNAL DRIVE STYLE | HIGH-TORQUE" |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES" |
| ANEE | GRIP LENGTH | 0.963 INCHES NOMINAL" |
| CMLP | THREAD QUANTITY PER INCH | 28" |
| CQBC | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH" |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM" |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SCREW-CLOSE TOLERANCE 100 DEG COUNTERSUNK REDUCED HEAD, HI-TORQUE, NON MAGNETIC CRES, IVD ALUMINUM COATED" |
| FEAT | SPECIAL FEATURES | LUBRICANT- CETYL ALCOHOL" |
| MATT | MATERIAL | NICKEL ALLOY 718 OVERALL" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5662 NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE OVERALL" |
| SFTT | SURFACE TREATMENT | ALUMINUM OVERALL" |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-DTL-83488 TY 2 CLS 3 NATIONAL STD/SPEC SINGLE TREATMENT RESPONSE OVERALL" |
| THSD | THREAD SERIES DESIGNATOR | UNJF" |
| AAJD | THREAD CLASS | 3A" |
| AAJF | THREAD DIRECTION | RIGHT-HAND" |
| AASA | THREAD LENGTH | 0.469 INCHES NOMINAL" |
| AASB | FASTENER LENGTH | 1.432 INCHES NOMINAL" |
| AASK | HEAD STYLE | FILLISTER COUNTERSUNK" |
| AASL | HEAD DIAMETER | 0.389 INCHES MINIMUM AND 0.394 INCHES MAXIMUM" |
| AASU | HEAD HEIGHT | 0.070 INCHES MINIMUM AND 0.074 INCHES MAXIMUM" |
| AAUR | GRIP DIAMETER | 0.248 INCHES MINIMUM AND 0.249 INCHES MAXIMUM" |
| ABQZ | INTERNAL DRIVE STYLE | HIGH-TORQUE" |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES" |
| ANEE | GRIP LENGTH | 0.963 INCHES NOMINAL" |
| CMLP | THREAD QUANTITY PER INCH | 28" |
| CQBC | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH" |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM" |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SCREW-CLOSE TOLERANCE 100 DEG COUNTERSUNK REDUCED HEAD, HI-TORQUE, NON MAGNETIC CRES, IVD ALUMINUM COATED" |
| FEAT | SPECIAL FEATURES | LUBRICANT- CETYL ALCOHOL" |
| MATT | MATERIAL | NICKEL ALLOY 718 OVERALL" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5662 NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE OVERALL" |
| SFTT | SURFACE TREATMENT | ALUMINUM OVERALL" |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-DTL-83488 TY 2 CLS 3 NATIONAL STD/SPEC SINGLE TREATMENT RESPONSE OVERALL" |
| THSD | THREAD SERIES DESIGNATOR | UNJF" |
