Are you looking quote for part WC71237? The C E Niehoff And Co-manufactured component (CAGE Code: 76761) is documented under NSN 2530-00-460-6408 as Cylinder Assembly H. For the fastest quote, please complete our RFQ form with details about WC71237. We guarantee a response within 15 minutes
ASAP Components provides the verified WC71237, classified under INC 10862, FSG 25 Vehicular Equipment Components, FSC 2530 Vehicular Brake Steering Axle Wheel and Track Components, NIIN 00-460-6408, and NCB 00. Submit your requirements today to receive immediate pricing and availability information.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 2530-00-460-6408 Item PartTypeName: CYLINDER ASSEMBLY,HYDRAULIC BRAK | 2530 | 004606408 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 3607 | C | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAFZ | BODY MATERIAL | IRON,CAST |
| ABDR | MOUNTING PROVISION | THREADED MOUNTING HOLES |
| ABKW | OVERALL HEIGHT | 2.425 INCHES NOMINAL |
| ABMK | OVERALL WIDTH | 2.935 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 1.500 INCHES NOMINAL |
| ADAR | BODY OUTSIDE DIAMETER | 1.975 INCHES NOMINAL |
| AJFY | SEAT ANGLE IN DEG | 45.0 |
| AKBM | MOUNTING FACILITY THREAD CLASS | 2B |
| AKBN | MOUNTING FACILITY THREAD DIRECTION | RIGHT-HAND |
| ASBP | BORE TYPE | STRAIGHT |
| BBBW | MOUNTING PROVISION ARRANGEMENT STYLE | TWO HOLE |
| CDTD | MOUNTING FACILITY THREAD SERIES DESIGNATOR | UNC |
| CDTF | MOUNTING FACILITY THREAD DIAMETER | 0.312 INCHES NOMINAL |
| CDTG | MOUNTING FACILITY THREAD QUANTITY PER INCH | 18 |
| CKSD | DESIGN CHARACTERISTICS | DOUBLE ACTING SINGLE CYLINDER |
| CLML | MOUNTING TYPE AND LOCATION | FLANGE CENTER SECTION |
| CLMN | MOUNTING FACILITY THREAD LENGTH | 0.675 INCHES NOMINAL |
| CLMR | CENTER TO CENTER DISTANCE BETWEEN MOUNTING PROVISIONS | 2.000 INCHES NOMINAL |
| CLMS | PORT LOCATION AND QUANTITY | 1 CENTER SECTION |
| CLMT | PORT STYLE | INVERTED FLARE |
| CLMW | PORT THREAD SERIES DESIGNATOR | UNS |
| CLMX | PORT THREAD DIAMETER | 0.438 INCHES NOMINAL |
| CLMY | PORT THREAD QUANTITY PER INCH | 24 |
| CLNB | PORT THREAD CLASS | 2B |
| CLND | BLEEDING FEATURE QUANTITY | 1 |
| End Use : 30230 | Other parts and accessories of vehicles |
|---|---|
| Schedule B : 8708300050 (NAICS 336340) | Brakes and servo-brakes and parts, of motor vehicles of headings 8701 to 8705 |
| SITC : 78433 | Brakes and servo-brakes and parts thereof for tractors, motor cars and other motor vehicles, etc. |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | U - Precious metal content is unknown |
| AAC | J |
|---|---|
| Classification Control | U |
| MGMT_CTL | J2200x- |
| Quantity per pack | No qup |
| Repariability | This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item. |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Ea |
| ACC: | V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LTL: | W - Rating variable |
| NMFC: | 133300 - Machinery/machines noi |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 885 - Vehicles, mhe, road construction, repair parts and components |
|
Guaranteed on-time |
|
|
Customized and |
|
|
Over 5100 |
|
|
Complete Purchasing |
