Quote for T483 C And K Components Inc Part with NSN 5930-00-673-5882

Part Number:  T483
Manufacturer:  c and k components inc
NIIN:  6735882
Item Name :  switch sensitive
CAGE Code:  80207
FSC:  5930 Switches
INC Code:  00399
Country:  USA
NCB Code:  00
FSG:  59 Electrical and Electronic Equipment Components
Last Updated:  01-13-2026

Are you looking quote for part T483? The C And K Components Inc-manufactured component (CAGE Code: 80207) is documented under NSN 5930-00-673-5882 as Switch Sensitive. For the fastest quote, please complete our RFQ form with details about T483. We guarantee a response within 15 minutes.

ASAP Components provides the verified T483, classified under INC 00399, FSG 59 Electrical and Electronic Equipment Components, FSC 5930 Switches, NIIN 00-673-5882, and NCB 00. Submit your requirements today to receive immediate pricing and availability information.

Please fill out below form for T483

“*” Required Fields Are Compulsory

NSN Information for Part Number T483 with NSN 5930-00-673-5882, 5930006735882

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5930-00-673-5882

Item PartTypeName:

SWITCH,SENSITIVE

59300067358820P
CIICHCCESDPMICCriticalityENAC
U U
Part NumberISCRNVCRNCCHCCMSDSSADC
2039900083293

Characteristics Data of NSN 5930-00-673-5882, 5930006735882

MRCCriteriaCharacteristic
ABHPOVERALL LENGTH1.730 INCHES NOMINAL
ABKQCENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH0.437 INCHES NOMINAL
ABKWOVERALL HEIGHT1.376 INCHES NOMINAL
ADAQBODY LENGTH0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM
ADAUBODY HEIGHT0.716 INCHES MINIMUM AND 0.736 INCHES MAXIMUM
AEBVUNTHREADED MOUNTING HOLE DIAMETER0.110 INCHES MINIMUM AND 0.130 INCHES MAXIMUM
AFUQACTUATOR STYLEROLLER ARM
AFUUACTUATOR FREE POSITION HEIGHT0.650 INCHES MAXIMUM
AFUVACTUATOR ROLLER DIAMETER0.190 INCHES NOMINAL
AFXEMAXIMUM VOLTAGE RATING IN VOLTS250.0 AC AND 30.0 DC
AKNAINCLOSURE TYPEUNINCLOSED
CRLDNONPILE-UP CONTACT ARRANGEMENT2 POLE,DOUBLE THROW,BOTH POSITIONS MAINTAINED SINGLE SWITCH UNIT
CRRMSWITCH RELEASE FORCE2.0 OUNCES MINIMUM
CSJNSWITCH ACTUATING FORCE3.0 OUNCES MINIMUM AND 9.0 OUNCES MAXIMUM
CXQQACTUATOR MOVEMENT0.360 OVERTRAVEL INCHES MAXIMUM
CXQRCONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE5.000 AMPERES RESISTIVE DC AND 3.000 AMPERES INDUCTIVE DC AND 10.000 AMPERES RESISTIVE AC
TTQYTERMINAL TYPE AND QUANTITY6 QUICK DISCONNECT,MALE

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8536509050 (NAICS 335931) Switches, slide, for a voltage not exceeding 1, 000 v
SITC : 77255 Switches for electrical apparatus, n.E.S., for voltages not exceeding 1, 000 volts

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC U - Precious metal content is unknown

NSN Management Codes

AAC Z
Classification Control U
MGMT_CTL Q2200x-
Quantity per pack 1
Repariability This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 061300 - Circuit breaker/switch noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

ASAP Semiconductor’s Certifications And Memberships



bottom to top