Are you looking quote for part BHMA-A156.2? The Builders Hardware Mfrs Assn Inc-manufactured component (CAGE Code: 41280) is documented under NSN 5340-00-847-2605 as Lock Set Mortise. For the fastest quote, please complete our RFQ form with details about BHMA-A156.2. We guarantee a response within 15 minutes.
ASAP Components provides the verified BHMA-A156.2, classified under INC 06701, FSG 53 Hardware and Abrasives, FSC 5340 Hardware Commercial, NIIN 00-847-2605, and NCB 00. Submit your requirements today to receive immediate pricing and availability information.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-00-847-2605 Item PartTypeName: LOCK SET,MORTISE | 5340 | 008472605 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| J | U | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| ANSI A156.2 F82 GRADE 1 | 6 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABNM | THICKNESS | 1.375 INCHES NOMINAL OVERALL |
| ABRY | LENGTH | 2.250 INCHES NOMINAL |
| AGAV | END ITEM IDENTIFICATION | LOGISTICS SUPPORT VESSEL |
| APGF | DESIGN TYPE | LATCH BOLT |
| APHE | OPERATION METHOD | OUTSIDE TURN KNOB AND OUTSIDE KEY AND PUSH BUTTON LATCH BOLT |
| CHMF | KNOB SHAPE | ROUND |
| MATT | MATERIAL | STEEL CORROSION RESISTING CASE |
| SHPE | SHAPE | ROUND CASE |
| ABGL | WIDTH | 1.125 INCHES NOMINAL |
| ABNM | THICKNESS | 2.750 INCHES NOMINAL BACKSET |
| ASBH | FACE SHAPE | BEVELED |
| ASSK | KNOB QUANTITY | 2 |
| BTJY | BOLT TYPE | REVERSE BEVEL |
| CBBL | FEATURES PROVIDED | ROSE AND STRIKE AND SCREW |
| CHLZ | LOCKING MECHANISM TYPE | PIN TUMBLER |
| FEAT | SPECIAL FEATURES | STRIKE PLATE SHALL HAVE ROUNDED CORNERS,EXCLUSIVE OF LIP |
| MATT | MATERIAL | ALUMINUM KNOB |
| SFTT | SURFACE TREATMENT | ANODIZE KNOB |
| SFTT | SURFACE TREATMENT | PASSIVATE CASE |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | 161 SERIES AND 1617-4 SET |
| End Use : 12300 | Finished metal shapes |
|---|---|
| Schedule B : 8302418035 (NAICS 332510) | Other base metal mountings, fittings and similar articles (not hinges) suitable for interior and exterior doors |
| SITC : 69916 | Mountings, fittings and similar articles for buildings, n.E.S., of base metal |
| ADPE | Represents items with no adp components |
|---|---|
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | A - Item does not contain precious metal. |
| AAC | Z |
|---|---|
| Classification Control | J |
| MGMT_CTL | T2200x- |
| Quantity per pack | 1 |
| Repariability | This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item. |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Ea |
| ACC: | B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LTL: | Q - 70.0 |
| NMFC: | 095760 - Locks/lock sets noi metal in bbl/bx |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 713 - Metal hardware |
