Quote for A11B805J Bishop Electronics Inc Part with NSN 5910-01-301-9657

Part Number:  A11B805J
Manufacturer:  bishop electronics inc
NIIN:  13019657
Item Name :  capacitor fixed met
CAGE Code:  58518
INC Code:  31959
Country:  USA
NCB Code:  01
FSG:  59 Electrical and Electronic Equipment Components
Last Updated:  10-08-2026

Are you looking quote for part A11B805J? The Bishop Electronics Inc-manufactured component (CAGE Code: 58518) is documented under NSN 5910-01-301-9657 as Capacitor Fixed Met. For the fastest quote, please complete our RFQ form with details about A11B805J. We guarantee a response within 15 minutes.

ASAP Components provides the verified A11B805J, classified under INC 31959, FSG 59 Electrical and Electronic Equipment Components, FSC 5910 Capacitors, NIIN 01-301-9657, and NCB 01. Submit your requirements today to receive immediate pricing and availability information.

Please fill out below form for A11B805J

“*” Required Fields Are Compulsory

NSN Information for Part Number A11B805J with NSN 5910-01-301-9657, 5910013019657

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5910-01-301-9657

Item PartTypeName:

CAPACITOR,FIXED,METALLIZED,PAPER

59100130196570P
CIICHCCESDPMICCriticalityENAC
U A
Part NumberISCRNVCRNCCHCCMSDSSADC
A11B80551CA

Characteristics Data of NSN 5910-01-301-9657, 5910013019657

MRCCriteriaCharacteristic
AEBZSCHEMATIC DIAGRAM DESIGNATORNO COMMON OR GROUNDED ELECTRODE(S)
TTQYTERMINAL TYPE AND QUANTITY2 UNINSULATED WIRE LEAD
AARGRELIABILITY INDICATORNOT ESTABLISHED
ABJTTERMINAL LENGTH1.500 INCHES MINIMUM
ADAQBODY LENGTH1.120 INCHES MINIMUM AND 1.220 INCHES MAXIMUM
ADATBODY WIDTH0.300 INCHES MINIMUM AND 0.400 INCHES MAXIMUM
AEBTTERMINAL DIAMETER0.032 INCHES NOMINAL
CQBFINSULATION RESISTANCE AT MAXIMUM OPERATING TEMP2000.0 MEGOHM-MICROFARADS
CQJJNONDERATED OPERATING TEMP-55.0 DEG CELSIUS MINIMUM AND 85.0 DEG CELSIUS MAXIMUM
CWJKCASE MATERIALPLASTIC
CWSGTERMINAL SURFACE TREATMENTSOLDER
AAQLBODY STYLEW/O MTG FACILITIES,TERMINALS ON OPPOSITE SURFACES
ADAUBODY HEIGHT0.460 INCHES MINIMUM AND 0.560 INCHES MAXIMUM
CQBQCAPACITANCE VALUE PER SECTION8.000 MICROFARADS SINGLE SECTION
CQWMNONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION100.0 DC SINGLE SECTION
CRTPTOLERANCE RANGE PER SECTION-5.00 TO 5.00 PERCENT SINGLE SECTION
CWPKINSULATION RESISTANCE AT REFERENCE TEMP20000.0 MEGOHM-MICROFARADS
CWPMDISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT1.000
CWSSDIELECTRIC MATERIALPLASTIC POLYESTER

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8532290040 (NAICS 334416) Fixed capacitors, nesoi
SITC : 77867 Fixed capacitors, n.E.S.

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC X
Classification Control U
MGMT_CTL 9b-----
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 061400 - Condensers/parts noi/capacitors
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

ASAP Semiconductor’s Certifications And Memberships



bottom to top