Are you looking quote for part 11204? The Bendix Corp-manufactured component (CAGE Code: 14892) is documented under NSN 2530-00-809-7382 as Cylinder Assembly H. For the fastest quote, please complete our RFQ form with details about 11204. We guarantee a response within 15 minutes.
ASAP Components provides the verified 11204, classified under INC 11007, FSG 25 Vehicular Equipment Components, FSC 2530 Vehicular Brake Steering Axle Wheel and Track Components, NIIN 00-809-7382, and NCB 00. Submit your requirements today to receive immediate pricing and availability information.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 2530-00-809-7382 Item PartTypeName: CYLINDER ASSEMBLY,HYDRAULIC BRAK | 2530 | 008097382 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 11204 | 2 | 9 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABKW | OVERALL HEIGHT | 4.219 INCHES NOMINAL |
| ABMK | OVERALL WIDTH | 2.625 INCHES NOMINAL |
| AMDX | FIRST END HOLE DIAMETER | 0.5615 INCHES MINIMUM AND 0.5640 INCHES MAXIMUM ALL WORKING ENDS |
| AMPC | FIRST END THICKNESS AT MOUNTING HOLES | 0.688 INCHES NOMINAL ALL WORKING ENDS |
| AMQZ | COMPRESSED LENGTH | 7.422 INCHES NOMINAL |
| ATEM | EXTENDED LENGTH | 8.922 INCHES NOMINAL |
| BBBW | MOUNTING PROVISION ARRANGEMENT STYLE | TWO HOLE |
| CKSF | FIRST PISTON ROD END STYLE | RING TYPE ALL WORKING ENDS |
| CLMQ | MOUNTING FACILITY DIAMETER | 0.468 INCHES NOMINAL |
| CLMR | CENTER TO CENTER DISTANCE BETWEEN MOUNTING PROVISIONS | 2.875 INCHES NOMINAL |
| CLMS | PORT LOCATION AND QUANTITY | 1 CYLINDER HEAD END |
| CLMT | PORT STYLE | GASKET SEAL SINGLE PORT |
| CLMW | PORT THREAD SERIES DESIGNATOR | UNF SINGLE PORT |
| CLMX | PORT THREAD DIAMETER | 0.500 INCHES NOMINAL SINGLE PORT |
| CLMY | PORT THREAD QUANTITY PER INCH | 20 SINGLE PORT |
| ABDR | MOUNTING PROVISION | UNTHREADED MOUNTING HOLES |
| AFLW | ACTUATION METHOD | DIRECT |
| BMWH | RESERVOIR TYPE | INTEGRAL |
| BYXG | STRAIGHT BORE INSIDE DIAMETER | 1.250 INCHES NOMINAL |
| CBBL | FEATURES PROVIDED | FILLER PLUG AND RUBBER BOOT |
| CLML | MOUNTING TYPE AND LOCATION | BOSS CENTER SECTION |
| CLNB | PORT THREAD CLASS | 2B SINGLE PORT |
| FEAT | SPECIAL FEATURES | W/INTEGRAL PEDAL SHAFT MTG CLEVIS |
| End Use : 30230 | Other parts and accessories of vehicles |
|---|---|
| Schedule B : 8708300050 (NAICS 336340) | Brakes and servo-brakes and parts, of motor vehicles of headings 8701 to 8705 |
| SITC : 78433 | Brakes and servo-brakes and parts thereof for tractors, motor cars and other motor vehicles, etc. |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | U - Precious metal content is unknown |
| AAC | V |
|---|---|
| Classification Control | U |
| MGMT_CTL | 12c2b-- |
| Quantity per pack | No qup |
| Repariability | If condemned or uneconomically repairable , then dispose at direct support (ds) level. |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Ea |
| ACC: | V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LTL: | W - Rating variable |
| NMFC: | 133300 - Machinery/machines noi |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 586 - Vehicle parts, other than automobile |
