Are you looking quote for part 1522? The Bendix Corp-manufactured component (CAGE Code: 06840) is documented under NSN 2530-00-366-8336 as Cylinder Assembly H. For the fastest quote, please complete our RFQ form with details about 1522. We guarantee a response within 15 minutes.
ASAP Components provides the verified 1522, classified under INC 11007, FSG 25 Vehicular Equipment Components, FSC 2530 Vehicular Brake Steering Axle Wheel and Track Components, NIIN 00-366-8336, and NCB 00. Submit your requirements today to receive immediate pricing and availability information.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 2530-00-366-8336 Item PartTypeName: CYLINDER ASSEMBLY,HYDRAULIC BRAK | 2530 | 003668336 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 1522 | C | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABDR | MOUNTING PROVISION | UNTHREADED MOUNTING HOLES |
| ABKW | OVERALL HEIGHT | 5.410 INCHES NOMINAL |
| ABMK | OVERALL WIDTH | 2.705 INCHES NOMINAL |
| AMQZ | COMPRESSED LENGTH | 9.000 INCHES NOMINAL |
| BBBW | MOUNTING PROVISION ARRANGEMENT STYLE | TWO HOLE |
| BMWH | RESERVOIR TYPE | INTEGRAL |
| BYXG | STRAIGHT BORE INSIDE DIAMETER | 1.125 INCHES NOMINAL |
| CLML | MOUNTING TYPE AND LOCATION | FLANGE CENTER SECTION |
| CLMQ | MOUNTING FACILITY DIAMETER | 0.406 INCHES NOMINAL |
| CLMR | CENTER TO CENTER DISTANCE BETWEEN MOUNTING PROVISIONS | 3.406 INCHES NOMINAL |
| CLMS | PORT LOCATION AND QUANTITY | 2 CENTER SECTION |
| CLMT | PORT STYLE | GASKET SEAL |
| CLMW | PORT THREAD SERIES DESIGNATOR | UNF |
| CLMX | PORT THREAD DIAMETER | 0.562 INCHES NOMINAL |
| CLMY | PORT THREAD QUANTITY PER INCH | 18 |
| CLNB | PORT THREAD CLASS | 2A |
| MATT | MATERIAL | STEEL BODY |
| End Use : 30230 | Other parts and accessories of vehicles |
|---|---|
| Schedule B : 8708300050 (NAICS 336340) | Brakes and servo-brakes and parts, of motor vehicles of headings 8701 to 8705 |
| SITC : 78433 | Brakes and servo-brakes and parts thereof for tractors, motor cars and other motor vehicles, etc. |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | U - Precious metal content is unknown |
| AAC | J |
|---|---|
| Classification Control | U |
| MGMT_CTL | J2200x- |
| Quantity per pack | 1 |
| Repariability | Item requires special handling or condemnation procedures for specific reasons, such as precious metal content, high dollar value, critical material, or hazardous materiel. refer to appropriate manuals or directives for specific instructions. |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Ea |
| ACC: | V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LTL: | W - Rating variable |
| NMFC: | 133300 - Machinery/machines noi |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 885 - Vehicles, mhe, road construction, repair parts and components |
