Are you looking quote for part SLC-8322? The Barber Colman Co-manufactured component (CAGE Code: 0A6H4) is documented under NSN 5930-01-442-3487 as Switch Thermostatic. For the fastest quote, please complete our RFQ form with details about SLC-8322. We guarantee a response within 15 minutes.
ASAP Components provides the verified SLC-8322, classified under INC 00451, FSG 59 Electrical and Electronic Equipment Components, FSC 5930 Switches, NIIN 01-442-3487, and NCB 01. Submit your requirements today to receive immediate pricing and availability information.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5930-01-442-3487 Item PartTypeName: SWITCH,THERMOSTATIC | 5930 | 014423487 | P | A | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| A | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| SLC-8322 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABPM | BODY DIAMETER | 4.500 INCHES NOMINAL |
| ADAT | BODY WIDTH | 4.125 INCHES NOMINAL |
| ADAU | BODY HEIGHT | 4.375 INCHES NOMINAL |
| CTZB | CONTACT VOLTAGE RATING IN VOLTS | 15.0 DC AT SEA LEVEL SINGLE VOLTAGE |
| FEAT | SPECIAL FEATURES | LOGOSIEBA, TYPE DUCT/IMMERSION WITH PROBE SENSOR, SETPOINT DAIL RANGE 0 TO 100 DEG F,SENSING 1000 OHMS BALCO, MOUNTINDG DUCT MOUNTING PLATE PROVIDE 2.500 STANDOFF PROVIDES CLEARANCE IF REQUIRED, MOUNTING IMMERSION INSTALL CONTROLLER DIRECTL |
| End Use : 21160 | Measuring, testing, control instruments |
|---|---|
| Schedule B : 9032100000 (NAICS 334512) | Thermostats |
| SITC : 87461 | Thermostats |
| ADPE | Represents items with no adp components |
|---|---|
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| ESD | A - No known electrostatic discharge (esd) or electromagnetic interference (emi) sensitivity. |
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | A - Item does not contain precious metal. |
