| MRC | Criteria | Characteristic |
|---|
| ADAQ | BODY LENGTH | 0.660 INCHES MINIMUM AND 0.785 INCHES MAXIMUM" |
| ADAT | BODY WIDTH | 0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM" |
| ADAU | BODY HEIGHT | 0.140 INCHES MINIMUM AND 0.180 INCHES MAXIMUM" |
| AEHX | MAXIMUM POWER DISSIPATION RATING | 60.0 MILLIWATTS" |
| AFGA | OPERATING TEMP RANGE | -55.0/+125.0 DEG CELSIUS" |
| AFJQ | STORAGE TEMP RANGE | -65.0/+150.0 DEG CELSIUS" |
| CBBL | FEATURES PROVIDED | HERMETICALLY SEALED AND MONOLITHIC AND POSITIVE OUTPUTS AND W/TOTEM POLE OUTPUT" |
| CQSJ | INCLOSURE MATERIAL | CERAMIC AND GLASS" |
| CQSZ | INCLOSURE CONFIGURATION | DUAL-IN-LINE" |
| CQWX | OUTPUT LOGIC FORM | TRANSISTOR-TRANSISTOR LOGIC" |
| CQZP | INPUT CIRCUIT PATTERN | HEX 1 INPUT" |
| CSSL | DESIGN FUNCTION AND QUANTITY | 6 INVERTER" |
| CTFT | CASE OUTLINE SOURCE AND DESIGNATOR | T0-116 JOINT ELECTRON DEVICE ENGINEERING COUNCIL" |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER" |
| CZEN | VOLTAGE RATING AND TYPE PER CHARACTERISTIC | -1.5 VOLTS MINIMUM POWER SOURCE AND 5.5 VOLTS MAXIMUM POWER SOURCE" |
| CZEQ | TIME RATING PER CHACTERISTIC | 22.00 NANOSECONDS MAXIMUM PROPAGATION DELAY TIME, LOW TO HIGH LEVEL OUTPUT AND 15.00 NANOSECONDS MAXIMUM PROPAGATION DELAY TIME, HIGH TO LOW LEVEL OUTPUT" |
| TEST | TEST DATA DOCUMENT | 73030-5E8071/53 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DR" |
| TTQY | TERMINAL TYPE AND QUANTITY | 14 PRINTED CIRCUIT" |
| ADAQ | BODY LENGTH | 0.660 INCHES MINIMUM AND 0.785 INCHES MAXIMUM" |
| ADAT | BODY WIDTH | 0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM" |
| ADAU | BODY HEIGHT | 0.140 INCHES MINIMUM AND 0.180 INCHES MAXIMUM" |
| AEHX | MAXIMUM POWER DISSIPATION RATING | 60.0 MILLIWATTS" |
| AFGA | OPERATING TEMP RANGE | -55.0/+125.0 DEG CELSIUS" |
| AFJQ | STORAGE TEMP RANGE | -65.0/+150.0 DEG CELSIUS" |
| CBBL | FEATURES PROVIDED | HERMETICALLY SEALED AND MONOLITHIC AND POSITIVE OUTPUTS AND W/TOTEM POLE OUTPUT" |
| CQSJ | INCLOSURE MATERIAL | CERAMIC AND GLASS" |
| CQSZ | INCLOSURE CONFIGURATION | DUAL-IN-LINE" |
| CQWX | OUTPUT LOGIC FORM | TRANSISTOR-TRANSISTOR LOGIC" |
| CQZP | INPUT CIRCUIT PATTERN | HEX 1 INPUT" |
| CSSL | DESIGN FUNCTION AND QUANTITY | 6 INVERTER" |
| CTFT | CASE OUTLINE SOURCE AND DESIGNATOR | T0-116 JOINT ELECTRON DEVICE ENGINEERING COUNCIL" |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER" |
| CZEN | VOLTAGE RATING AND TYPE PER CHARACTERISTIC | -1.5 VOLTS MINIMUM POWER SOURCE AND 5.5 VOLTS MAXIMUM POWER SOURCE" |
| CZEQ | TIME RATING PER CHACTERISTIC | 22.00 NANOSECONDS MAXIMUM PROPAGATION DELAY TIME, LOW TO HIGH LEVEL OUTPUT AND 15.00 NANOSECONDS MAXIMUM PROPAGATION DELAY TIME, HIGH TO LOW LEVEL OUTPUT" |
| TEST | TEST DATA DOCUMENT | 73030-5E8071/53 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DR" |
| TTQY | TERMINAL TYPE AND QUANTITY | 14 PRINTED CIRCUIT" |
