Are you looking quote for part DM15-010D? The Arco Electronics Inc-manufactured component (CAGE Code: 84171) is documented under NSN 5910-00-169-9011 as Capacitor Fixed Mic. For the fastest quote, please complete our RFQ form with details about DM15-010D. We guarantee a response within 15 minutes.
ASAP Components provides the verified DM15-010D, classified under INC 00005, FSG 59 Electrical and Electronic Equipment Components, FSC 5910 Capacitors, NIIN 00-169-9011, and NCB 00. Submit your requirements today to receive immediate pricing and availability information.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5910-00-169-9011 Item PartTypeName: CAPACITOR,FIXED,MICA DIELECTRIC | 5910 | 001699011 | P | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 942339-1 | B | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJT | TERMINAL LENGTH | 1.250 INCHES MINIMUM |
| ADAQ | BODY LENGTH | 0.450 INCHES MAXIMUM |
| ADAT | BODY WIDTH | 0.360 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 0.170 INCHES MAXIMUM |
| AEBP | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 0.203 INCHES MINIMUM AND 0.265 INCHES MAXIMUM |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) |
| CQBQ | CAPACITANCE VALUE PER SECTION | 1.000 PICOFARADS SINGLE SECTION |
| CQJJ | NONDERATED OPERATING TEMP | -55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM |
| CQWM | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 500.0 DC SINGLE SECTION |
| CRDN | TEMP COEFFICIENT OF CAPACITANCE RANGE PER SECTION IN PPM PER DEG CELSIUS | -200.0 TO 200.0 SINGLE SECTION |
| CRTP | TOLERANCE RANGE PER SECTION | -5.00 TO 5.00 PERCENT SINGLE SECTION |
| CWJK | CASE MATERIAL | PLASTIC |
| CWPK | INSULATION RESISTANCE AT REFERENCE TEMP | 100000.0 MEGOHMS |
| CWPM | DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 5.0000 |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER |
| TEST | TEST DATA DOCUMENT | 94580-942339 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWI |
| TTQY | TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD |
| End Use : 20005 | Electric apparatus |
|---|---|
| Schedule B : 8532290020 (NAICS 334416) | Fixed capacitors, mica dielectric, nesoi |
| SITC : 77867 | Fixed capacitors, n.E.S. |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | U - Precious metal content is unknown |
| AAC | Y |
|---|---|
| Classification Control | U |
| MGMT_CTL | 9n----- |
| Quantity per pack | 1 |
| Repariability | |
| Shelf Life | N/A |
| SOS | S9e |
| Unit of Measure | Ea |
| ACC: | H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps) |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LCL: | P - 77.5 |
| LTL: | P - 77.5 |
| NMFC: | 061400 - Condensers/parts noi/capacitors |
| SHC: | Z - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components |
