Quote for 1008750KP500 American Technical Ceramics Corp Part with NSN 5910-01-085-8350

Part Number:  1008750KP500
NIIN:  10858350
Item Name :  capacitor fixed gla
CAGE Code:  29990
INC Code:  00004
Country:  USA
NCB Code:  01
FSG:  59 Electrical and Electronic Equipment Components
Last Updated:  01-13-2026

Are you looking quote for part 1008750KP500? The American Technical Ceramics Corp-manufactured component (CAGE Code: 29990) is documented under NSN 5910-01-085-8350 as Capacitor Fixed Gla. For the fastest quote, please complete our RFQ form with details about 1008750KP500. We guarantee a response within 15 minutes.

ASAP Components provides the verified 1008750KP500, classified under INC 00004, FSG 59 Electrical and Electronic Equipment Components, FSC 5910 Capacitors, NIIN 01-085-8350, and NCB 01. Submit your requirements today to receive immediate pricing and availability information.

Please fill out below form for 1008750KP500

“*” Required Fields Are Compulsory

NSN Information for Part Number 1008750KP500 with NSN 5910-01-085-8350, 5910010858350

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5910-01-085-8350

Item PartTypeName:

CAPACITOR,FIXED,GLASS DIELECTRIC

59100108583500P
CIICHCCESDPMICCriticalityENAC
U U
Part NumberISCRNVCRNCCHCCMSDSSADC
1008750KP50021CA

Characteristics Data of NSN 5910-01-085-8350, 5910010858350

MRCCriteriaCharacteristic
AAQLBODY STYLECHIP TYPE
AARGRELIABILITY INDICATORNOT ESTABLISHED
ADAQBODY LENGTH0.140 INCHES MAXIMUM
ADATBODY WIDTH0.110 INCHES NOMINAL
ADAUBODY HEIGHT0.100 INCHES MAXIMUM
AEBZSCHEMATIC DIAGRAM DESIGNATORNO COMMON OR GROUNDED ELECTRODE(S)
CBBLFEATURES PROVIDEDHERMETICALLY SEALED CASE
CQBFINSULATION RESISTANCE AT MAXIMUM OPERATING TEMP100000.0 MEGOHMS
CQBQCAPACITANCE VALUE PER SECTION75.000 PICOFARADS SINGLE SECTION
CQJJNONDERATED OPERATING TEMP-55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM
CQLZTEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS90.0 SINGLE SECTION
CQWMNONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION500.0 DC SINGLE SECTION
CRHDTOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS-20.0 TO 20.0 SINGLE SECTION
CRTPTOLERANCE RANGE PER SECTION-2.00 TO 2.00 PERCENT SINGLE SECTION
CWJKCASE MATERIALGLASS
CWPKINSULATION RESISTANCE AT REFERENCE TEMP1000000.0 MEGOHMS
CWQFQUALITY FACTOR AT REFERENCE TEMP10000.0000
TTQYTERMINAL TYPE AND QUANTITY2 BONDING PAD

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8532290040 (NAICS 334416) Fixed capacitors, nesoi
SITC : 77867 Fixed capacitors, n.E.S.

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC U - Precious metal content is unknown

NSN Management Codes

AAC V
Classification Control U
MGMT_CTL Q2200x-
Quantity per pack No qup
Repariability This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 061400 - Condensers/parts noi/capacitors
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

ASAP Semiconductor’s Certifications And Memberships



bottom to top