Are you looking quote for part 65L1-2R1AB? The Alcoa Fastening Systems Ltd-manufactured component (CAGE Code: D0680) is documented under NSN 5340-00-946-2889 as Fastener Pawl. For the fastest quote, please complete our RFQ form with details about 65L1-2R1AB. We guarantee a response within 15 minutes.
ASAP Components provides the verified 65L1-2R1AB, classified under INC 28416, FSG 53 Hardware and Abrasives, FSC 5340 Hardware Commercial, NIIN 00-946-2889, and NCB 00. Submit your requirements today to receive immediate pricing and availability information.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-00-946-2889 Item PartTypeName: FASTENER,PAWL | 5340 | 009462889 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 10670761 | 6 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABMZ | DIAMETER | 0.430 INCHES MINIMUM AND 0.490 INCHES MAXIMUM |
| ABRY | LENGTH | 1.670 INCHES MINIMUM AND 1.730 INCHES MAXIMUM |
| ABTB | MOUNTING HOLE DIAMETER | 0.127 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| AHRL | OPERATIONAL DIRECTION | RIGHT-HAND |
| CJRT | PAWL TYPE | STRAIGHT |
| CJRX | PAWL ACTUATION METHOD | KNOB |
| CJRZ | PAWL LENGTH FROM ACTUATING SHAFT CENTER TO PAWL END | 0.660 INCHES MINIMUM AND 0.700 INCHES MAXIMUM |
| CZFU | PAWL SWING ANGLE | 135.0 DEGREES NOMINAL |
| FEAT | SPECIAL FEATURES | HOLE QUANTITY:4 |
| MATT | MATERIAL | ALUMINUM ALLOY 7075 OVERALL |
| SFTT | SURFACE TREATMENT | ANODIZE OVERALL |
| End Use : 12300 | Finished metal shapes |
|---|---|
| Schedule B : 8302497500 (NAICS 332510) | Other base metal mountings, fittings etc, nesoi |
| SITC : 69919 | Mountings, fittings and similar articles, n.E.S., of base metal; hat racks and pegs, brackets, etc., of base metal; base metal automatic door closures |
| ADPE | Represents items with no adp components |
|---|---|
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | U - Precious metal content is unknown |
| AAC | Z |
|---|---|
| Classification Control | U |
| MGMT_CTL | T2200x- |
| Quantity per pack | 10 |
| Repariability | This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item. |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Ea |
| ACC: | B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LTL: | Q - 70.0 |
| NMFC: | 093880 - Catches/latches metal noi |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 713 - Metal hardware |
