Are you looking quote for part 50V10-1088? The Alan Industries Inc-manufactured component (CAGE Code: 52750) is documented under NSN 5985-01-180-4099 as Attenuator Variable. For the fastest quote, please complete our RFQ form with details about 50V10-1088. We guarantee a response within 15 minutes.
ASAP Components provides the verified 50V10-1088, classified under INC 00838, FSG 59 Electrical and Electronic Equipment Components, FSC 5985 Antennas Waveguides and Related Equipment, NIIN 01-180-4099, and NCB 01. Submit your requirements today to receive immediate pricing and availability information.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5985-01-180-4099 Item PartTypeName: ATTENUATOR,VARIABLE | 5985 | 011804099 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 18-P02541M001 | 6 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAFS | APPLICATION DESIGN | TRANSMISSION LINE |
| AAQL | BODY STYLE | COAXIAL TYPE |
| ABHP | OVERALL LENGTH | 2.880 INCHES NOMINAL |
| ABKR | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 0.750 INCHES NOMINAL |
| ABKW | OVERALL HEIGHT | 1.900 INCHES MAXIMUM |
| ABMK | OVERALL WIDTH | 2.560 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.250 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.260 INCHES NOMINAL |
| AEBW | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 0.750 INCHES NOMINAL |
| AGAV | END ITEM IDENTIFICATION | AN/ALQ-122/B52 |
| AHTW | VOLTAGE STANDING WAVE RATIO | 1.30 |
| AHUC | COAXIAL CONNECTOR SERIES DESIGNATION | BNC AND SMA |
| AJDB | POWER RATING | 2.0 WATTS AVERAGE |
| AKEJ | MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNC |
| ASYC | INSERTION LOSS AT MINIMUM ATTENUATION IN MAXIMUM DECIBELS | 0.2 |
| ASYD | OVERALL ATTENUATION RANGE IN DECIBELS | 0.0 TO 10.0 |
| ASYF | ATTENUATION VARIATION METHOD | STEPPED |
| ASYG | STEP POSITION QUANTITY | 10 |
| ASYH | ATTENUATION PER STEP IN DECIBELS | 1.0 |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 4 THREADED HOLE |
| BNGR | FREQUENCY RANGE | 0.000 HERTZ MINIMUM AND 1.000 GIGAHERTZ MAXIMUM |
| BQNR | OVERALL ATTENUATION ACCURACY IN DECIBELS | -0.20 TO 0.20 |
| CGGK | MOUNTING THREAD QUANTITY | 32 PER INCH |
| CQTQ | ADJUSTMENT DEVICE TYPE AND QUANTITY | 1 SHAFT |
| CQYJ | MOUNTING FACILITY PATTERN | FOUR POSITION DIAMOND |
| CRSJ | SHAFT TYPE | ROUND,SLOTTED |
| CRYY | MOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER | 0.138 INCHES |
| CTGG | IMPEDANCE RATING IN OHMS | 50.0 INPUT-OUTPUT |
| TTQY | TERMINAL TYPE AND QUANTITY | 2 CONNECTOR,COAXIAL,FEMALE |
| End Use : 21400 | Telecommunications equipment |
|---|---|
| Schedule B : 8529109000 (NAICS 334220) | Antenna & antenna reflectors of all kinds; parts suitable for use soley or principally w/ apparatus of heading 8525 to 8528, nesoi |
| SITC : 76493 | Parts of television receivers, radiobroadcast receivers, transmission apparatus for radio telephony, telegraphy, broadcasting or television etc. |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | A - Item does not contain precious metal. |
| AAC | J |
|---|---|
| Classification Control | U |
| MGMT_CTL | Sf9eh-n |
| Quantity per pack | 1 |
| Repariability | |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Ea |
| ACC: | H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps) |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LTL: | J - 100.0 |
| NMFC: | 061700 - Elec appliances/instruments noi |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 658 - Electrical appliances, small |
