Quote for 968-1D935 Advanced Logic Resources Inc Part with NSN 5905-00-013-7598

Part Number:  968-1D935
Alternate P/N:  9681D935
NIIN:  137598
Item Name :  resistor variable w
CAGE Code:  07CR8
INC Code:  37408
Country:  USA
NCB Code:  00
FSG:  59 Electrical and Electronic Equipment Components
Last Updated:  05-23-2025

Are you looking quote for part 968-1D935? The Advanced Logic Resources Inc-manufactured component (CAGE Code: 07CR8) is documented under NSN 5905-00-013-7598 as Resistor Variable W. For the fastest quote, please complete our RFQ form with details about 968-1D935. We guarantee a response within 15 minutes

ASAP Components provides the verified 968-1D935, classified under INC 37408, FSG 59 Electrical and Electronic Equipment Components, FSC 5905 Resistors, NIIN 00-013-7598, and NCB 00. Submit your requirements today to receive immediate pricing and availability information.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 968-1D935

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number 968-1D935 with NSN 5905-00-013-7598, 5905000137598

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-00-013-7598

Item PartTypeName:

RESISTOR,VARIABLE,WIRE WOUND,PRE

59050001375980N
CIICHCCESDPMICCriticalityENAC
U U
Part NumberISCRNVCRNCCHCCMSDSSADC
751-7008293

Characteristics Data of NSN 5905-00-013-7598, 5905000137598

MRCCriteriaCharacteristic
AAPNSECTION QUANTITY1
AAQLBODY STYLECYLINDRICAL SERVO MOUNTED
AARGRELIABILITY INDICATORNOT ESTABLISHED
AAVLPILOT DIAMETER0.8750 INCHES NOMINAL
AAVMPILOT LENGTH0.0600 INCHES NOMINAL
ABPAUNDERCUT DIAMETER1.875 INCHES NOMINAL
ABPCUNDERCUT WIDTH0.0600 INCHES NOMINAL
ABPMBODY DIAMETER2.016 INCHES MAXIMUM
ABWVSHAFT DIAMETER0.250 INCHES NOMINAL
ABXFSHAFT LENGTH0.500 INCHES NOMINAL
ADAQBODY LENGTH1.062 INCHES NOMINAL
AECZMOUNTING LIP DIAMETER2.0000 INCHES NOMINAL
AEDAMOUNTING LIP DEPTH0.0620 INCHES NOMINAL
AEDXSHAFT STYLEROUND
AEDZSHAFT BEARING TYPEBALL
AEFDACTUATOR TYPESINGLE SHAFT
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION360.0 NOMINAL
AEFKMAXIMUM STARTING TORQUE0.80 INCH-OUNCES
AEFLMAXIMUM RUNNING TORQUE0.20 INCH-OUNCES
AEFYSHAFT END PLAY0.00300 INCHES
AEFZSHAFT RUNOUT0.001 INCHES
AEGALATERAL RUNOUT0.002 INCHES
AEGBPILOT DIAMETER RUNOUT0.002 INCHES
AEGCSHAFT RADIAL PLAY0.002 INCHES
APXHTERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
AXGYMOUNTING METHODCLAMP RING
CBBLFEATURES PROVIDEDNONMETALLIC SHAFT
CQCCELECTRICAL RESISTANCE PER SECTION20.0 KILOHMS SINGLE SECTION
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG360.0 NOMINAL
CQFLFUNCTION CONFORMITY TOLERANCE PER SECTION-0.25 TO 0.25 SINGLE SECTION
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER120.0 SINGLE SECTION
CRFJTEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-20.0 TO 20.0 SINGLE SECTION
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS1.25 FREE AIR SINGLE SECTION
CRGMFUNCTION CONFORMITY PER SECTIONSINGLE SECTION INDEPENDENT LINEARITY
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-1.0 TO 1.0 SINGLE SECTION
CRSXACTUATOR TRAVEL CONTROL FEATURECONTINUOUS MOTION
CSBXFUNCTION CHARACTERISTIC PER SECTIONSINGLE SECTION LINEAR
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER70.0 SINGLE SECTION
TTQYTERMINAL TYPE AND QUANTITY3 TAB,SOLDER LUG

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8533390080 (NAICS 334416) Wirewound variable resistors, nesoi
SITC : 77233 Wirewound electrical variable resistors (including rheostats and potentiometers)

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC U - Precious metal content is unknown

NSN Management Codes

AAC X
Classification Control U
MGMT_CTL 9b-----
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 062960 - Reostats/parts noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 658 - Electrical appliances, small

USA Flag

We are proud to supply every branch of the United States military

Why Choose Us

Guaranteed on-time
Delivery

Customized and
User-friendly Database

Over 5100
Manufacturers

Complete Purchasing
Solutions

ASAP Semiconductor’s Certifications And Memberships



bottom to top