Are you searching for parts under NSN 5905-01-285-5488? We encourage you to search through our inventory of over 2 billion new and aftermarket parts applicable within the aerospace industry. Owned and operated by ASAP Semiconductor, ASAP Components stocks key parts of NSN 5905-01-285-5488 such as 4289, 5839K70P004, 741-6508.
The ASAP method incorporates rigorous quality assurance testing, efficient shipping and handling, and unparalleled customer service. No matter how hard the National Stock Number part is to find, the ASAP team will find a sourcing solution.
We are an AS9120B, ISO 9001:2015 certified and FAA AC 0056B accredited company. We are also the only independent distributor with a NO CHINA SOURCING policy. Submit an RFQ today and experience the ASAP method for yourself.
| Item Name | Resistor Variable W |
| INC Code | 37408 |
| Federal Supply Group (FSG) | Electrical and Electronic Equipment Components |
| Federal Supply Class (FSC) | 5905 Resistors |
| National Item Identification Number (NIIN) | 01-285-5488 (012855488) |
| NCB Code | USA (01) |
| Part Number | Manufacturer | Item Name | QTY | RFQ |
|---|---|---|---|---|
| 4289 | general dynamics global imaging | resistor variable w | Avl | RFQ |
| 4289 | sensor systems inc | resistor variable w | Avl | RFQ |
| 5839K70P004 | ametek inc | resistor variable w | Avl | RFQ |
| 5839K70P004 | sensor systems inc | resistor variable w | Avl | RFQ |
| 741-6508 | servo instrument corporation | resistor variable w | Avl | RFQ |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 2 |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | 0.9683 INCHES MINIMUM AND 0.9688 INCHES MAXIMUM |
| AAVM | PILOT LENGTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 0.975 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0570 INCHES MINIMUM |
| ABPM | BODY DIAMETER | 1.125 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.1246 INCHES MINIMUM AND 0.1249 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.656 INCHES MINIMUM AND 0.719 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 1.250 INCHES MAXIMUM |
| AECZ | MOUNTING LIP DIAMETER | 1.0570 INCHES MINIMUM AND 1.0670 INCHES MAXIMUM |
| AEDA | MOUNTING LIP DEPTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND,SLOTTED |
| AEDZ | SHAFT BEARING TYPE | BEARING |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFK | MAXIMUM STARTING TORQUE | 0.30 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 0.30 INCH-OUNCES |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AGAV | END ITEM IDENTIFICATION | SPEC PROJ ERA |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AXGY | MOUNTING METHOD | CLAMP RING |
| CBME | CUBIC MEASURE | 1.243 CUBIC INCHES |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 ALL SECTIONS |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -20.0 TO 20.0 ALL SECTIONS |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| TEST | TEST DATA DOCUMENT | 97424-5839K70 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW |
| Relevant Components for NSN - 5905-01-285-5488, 5905012855488 | ||||
| 5935-01-278-3059 (5935012783059) | 5905-01-256-1503 (5905012561503) | 5935-01-525-7175 (5935015257175) | 5999-01-504-0324 (5999015040324) | |
| 5965-01-684-1554 (5965016841554) | 5962-01-435-1333 (5962014351333) | 5925-00-103-5151 (5925001035151) | 5945-00-333-1053 (5945003331053) | |
| 5995-01-117-0077 (5995011170077) | 5950-01-127-7165 (5950011277165) | 5925-00-449-3777 (5925004493777) | 5930-01-299-2711 (5930012992711) | |
|
Guaranteed on-time |
|
|
Customized and |
|
|
Over 5100 |
|
|
Complete Purchasing |
