Electronic parts manufacturers like Vector Electronics are just a few of the respected suppliers that make up our extensive inventory. Our extensive international supply chain network allows us to do business with the highest quality electronic manufacturers like Vector Electronics around the globe, and our strict No China Sourcing Policy serves as a guarantee that your parts will be sourced responsibly and come from a legitimate manufacturer. Each electronic part in our inventory is listed online with its part number such as 4613-3, HD34-1, CCK17F-90, 169P84C1, CCA15S-90-001 and a helpful description. At ASAP Components, owned and operated by ASAP Semiconductor, customer experience is our top priority. To see how we are revolutionizing the Vector Electronics parts procurement process, submit an RFQ below.
| Part No | Description | Part Type | QTY | RFQ |
|---|---|---|---|---|
| 4613-3 | pc board ibm pc xt pph 4.2x13.25 plugboard card edge 0.1"" (2.54mm) grid pad per hole (round) 62 @ 0.1"" (2.54mm) 0.042"" (1.07mm) 13.25"" l x 4.20"" w (336.6mm x 106.7mm) 0.062"" (1.57mm) 1/16" | prototyping products | Avl | |
| HD34-1 | hardware kit t-strut .5"" screws t-strut - | boxes enclosures racks | Avl | |
| CCK17F-90 | card rack kit 5ux19x12 frame subrack kit 12.000"" l x 19.000"" w (304.80mm x 482.60mm) 5u = 8.750"" (222.25mm) 6.000"" ~ 8.000"" h x 9.600"" l (152.40mm ~ 203.20mm x 243.84mm) no card guide aluminum | boxes enclosures racks | Avl | |
| 169P84C1 | pc board cem-1 copp-1side 8.5x17 breadboard drilled copper clad 0.1"" (2.54mm) grid - - 0.042"" (1.07mm) 17.00"" l x 8.50"" w (431.8mm x 215.9mm) 0.062"" (1.57mm) 1/16" | prototyping products | Avl | |
| CCA15S-90-001 | card rack 4ux19x12 snap-in plas assembled subracks with card guides 12.000"" l x 19.000"" w (304.80mm x 482.60mm) 4u = 7.000"" (177.80mm) 4.250"" ~ 6.250"" h x 9.600"" l (107.95mm ~ 158.75mm x 243.84mm) card guide aluminum | boxes enclosures racks | Avl | |
| R53-M | pin socket .055"" hole pkg/1000 three level wire wrap pins - | prototyping products | Avl | |
| T124-058-500 | solder washer kit .058 id pk/500 solder washers socket pin | prototyping products | Avl | |
| HA14 | handle ejector pulltype 4pcs/pkg pull type ejector handle plugbordö | boxes enclosures racks | Avl | |
| CG2-95M-090 | screw metal card guide metal screw mount 8.140"" (206.76mm) customizing card rack | boxes enclosures racks | Avl | |
| CPCIBP8-6-64 | backplane cpci 8slot for 6u card 6u 8 compactpci« - | boxes enclosures racks | Avl | |
| 3682-4 | pcb intrlvd buses/gndpln 4.5x6.5 plugboard card edge 0.1"" (2.54mm) grid common bus 44 @ 0.156"" (3.96mm) 0.042"" (1.07mm) 6.50"" l x 4.50"" w (165.1mm x 114.3mm) 0.062"" (1.57mm) 1/16" | prototyping products | Avl | |
| HD94 | hardware 8-32 x 5/8"" pkg/12 hardware kit sidewalls | boxes enclosures racks | Avl | |
| 106P106-1 | pc board pad-per-hole 10.6x10.6 breadboard general purpose 0.1"" (2.54mm) grid pad per hole (round) - 0.042"" (1.07mm) 10.60"" l x 10.60"" w (269.2mm x269.2mm) 0.062"" (1.57mm) 1/16" | prototyping products | Avl | |
| EB220-3U | board extender blank - - - - | prototyping products | Avl | |
| 5250268-24 | nut strip rear horizontal 5"" nut strip rail rear horizontal | boxes enclosures racks | Avl | |
| CCB160-6U-122 | vme 6u x 1/60mm assem w/j1/j2 assembled subracks with card guides 9.270"" l x 19.000"" w (235.46mm x 482.60mm) 6u = 10.500"" (266.70mm) 9.187"" h x 6.300"" l (233.35mm x 160.02mm) assembled with card guides aluminum | boxes enclosures racks | Avl | |
| CM45B95-4 | module card mount 4"" width card mount module 9.570"" l x 4.000"" w (243.08mm x 101.60mm) 3u = 5.250"" (133.35mm) 4.500"" h x 9.600"" l (114.30mm x 243.84mm) - aluminum | boxes enclosures racks | Avl | |
| VMEBP12M00 | backplane vme j1/j2 12-slot mono 6u 12 vme j1/j2 0.800"" (20.32mm) | boxes enclosures racks | Avl | |
| 12X12C2 | pc board cem-1 copp-2side 12x12 copper clad uncoated 12.00"" x 12.00"" (304.8mm x 304.8mm) 0.062"" (1.57mm) 1/16"" copper clad fr4 double sided 1 oz. | prototyping products | Avl | |
| SW87P119-90 | panel cardrack p-type 8.75x12 - 12.000"" l x 1.050"" w (304.80mm x 26.67mm) 5u = 8.750"" (222.25mm) 8.000"" h (203.20mm) - aluminum | boxes enclosures racks | Avl | |
| CCK13S-HT-90 | card rack kit 3ux10.25x9 snap-in subrack kit 9.000"" l x 10.250"" w (228.60mm x 260.35mm) 3u = 5.250"" (133.35mm) 2.500"" ~ 4.500"" h x 6.500"" l (63.50mm ~ 114.30mm x 165.10mm) card guide aluminum | boxes enclosures racks | Avl | |
| HA19-3U | handle 3u subrack blk aluminum handle(s) subrack 3u | boxes enclosures racks | Avl | |
| CG3-340U-12 | catd guide 340mm polycarbonate snap-in mount 13.386"" (340.00mm) 0.062 ~ 0.090"" (1.57 ~ 2.29mm) cards | boxes enclosures racks | Avl | |
| 5250268-46 | nut strip rear horizontal 9.40"" nut strip rail rear horizontal | boxes enclosures racks | Avl | |
| FP15B8HP-1 | panel front assy 9ux8hp cut-outs panel front pc board | boxes enclosures racks | Avl | |
| CG3-160S | card guide 160mm straight polycarbonate snap-in mount 6.299"" (160.00mm) 0.062 ~ 0.090"" (1.57 ~ 2.29mm) cards | boxes enclosures racks | Avl | |
| SE1522B | enclosure assy 4u desktop 22.000"" l x 17.800"" w x 6.970"" h (558.80mm x 452.12mm x 177.04mm) 23.600"" l x 20.200"" w x 8.570"" h (599.44mm x 513.08mm x 217.68mm) metal aluminum front and rear access enclosed bottom sides top desktop rack doorless gray two pair sides | boxes enclosures racks | Avl | |
| CCA26-84-00 | card rack compact pci 3ux8.5x19 assembled subracks with card guides 8.500"" l x 19.000"" w (215.90mm x 482.60mm) 3u = 5.250"" (133.35mm) 3.937"" h x 8.660"" l (100.00mm x 219.96mm) guide plate aluminum | boxes enclosures racks | Avl | |
| 1404-0016-84 | nut strip front horiz 17"" nut strip rail front horizontal | boxes enclosures racks | Avl | |
| 1440-0013-42 | extrusion rear horizontal 8.60"" extrusion rear horizontal - | boxes enclosures racks | Avl | |
| VMEBP07P00 | backplane vme j1/j2 7-slot mono 6u 7 vme j1/j2 0.800"" (20.32mm) | boxes enclosures racks | Avl | |
| 3690-37 | extender card pcmcia 7"" type 2&3 pcmcia 1.75"" x 7"" (44.45mm x 177.8mm) 68 pin fr4 epoxy glass | prototyping products | Avl | |
| CG3-160ER | card guide 160mm red w/emc clip polycarbonate snap-in mount 6.299"" (160.00mm) 0.062 ~ 0.090"" (1.57 ~ 2.29mm) cards | boxes enclosures racks | Avl | |
| 94300008 | sleeve plastic black double sleeve - - | boxes enclosures racks | Avl | |
| EFP204A97 | mod efp 3ux2.05 for 4.5x9.6 pcb efp module pcb | boxes enclosures racks | Avl | |
| T44-M | terminal miniwrap 1000pcs/pkg bifurcated miniwrap terminals with sq. post - t44 1/16"" boards with 0.042"" (1.07mm) diameter holes | prototyping products | Avl | |
| CCA26-42-03 | card rack vent/fix cov 3ux8.5x9 assembled subracks with card guides 8.500"" l (215.90mm) 3u = 5.250"" (133.35mm) 3.937"" h x 8.660"" l (100.00mm x 219.96mm) guide plate aluminum | boxes enclosures racks | Avl | |
| CG2-80M | card guide metal screw 12pcs metal screw mount 6.640"" (168.66mm) customizing card rack | boxes enclosures racks | Avl | |
| 1441-0012-84 | extrusion front emc rail 17"" extrusion front - | boxes enclosures racks | Avl | |
| VME64E03P01 | backplane vme 64x3slot j1/j2/p0 6u 3 vme j1/j2/j0 0.800"" (20.32mm) | boxes enclosures racks | Avl | |
| VMEBP05M00 | backplane vme j1/j2 5-slot mono 6u 5 vme j1/j2 0.800"" (20.32mm) | boxes enclosures racks | Avl | |
| VMEBP6J1 | backplane 6 slot j1 4.74"" 3u 6 vme j1/j2 0.800"" (20.32mm) | boxes enclosures racks | Avl | |
| HD56 | hardware backplane mount 12sets hardware kit subrack backplane 3u | boxes enclosures racks | Avl | |
| 3690-18 | extender card multibus for 46-8 multibus 7.5"" x 12"" (190.5mm x 304.8mm) 30/43 each side 0.1""/0.156"" (2.54mm/3.96mm) centers fr4 epoxy glass | prototyping products | Avl | |
| 8012 | pc board pad-per-hole 9.2x11.0 breadboard general purpose 0.1"" (2.54mm) grid pad per hole (round) - 0.042"" (1.07mm) 11.00"" l x 9.20"" w (279.4mm x 233.7mm) 0.062"" (1.57mm) 1/16" | prototyping products | Avl | |
| CCA26-84-00-00 | card rack compact pci 3ux8.5x20 assembled subracks with card guides 8.500"" l x 19.000"" w (215.90mm x 482.60mm) 3u = 5.250"" (133.35mm) 3.937"" h x 8.660"" l (100.00mm x 219.96mm) guide plate aluminum | boxes enclosures racks | Avl | |
| VMEBP10J1 | backplane vme j1 10-slot mono 6u 10 vme j1/j2 0.800"" (20.32mm) | boxes enclosures racks | Avl | |
| BP42-4 | panel rear 4.56x5.22 for efp454a panel rear efp module | boxes enclosures racks | Avl | |
| 169P44WEC2 | pc board fr4 copp-2side 4.5x17.0 breadboard drilled copper clad 0.1"" (2.54mm) grid - - 0.042"" (1.07mm) 17.00"" l x 4.50"" w (431.6mm x 114.3mm) 0.062"" (1.57mm) 1/16" | prototyping products | Avl | |
| CCA400-3U | card rack vme 3ux400mm assembled subrack frame 18.720"" l x 19.000"" w (475.49mm x 482.60mm) 3u = 5.250"" (133.35mm) 3.940"" h x 15.750"" l (100.08mm x 400.05mm) no card guide aluminum | boxes enclosures racks | Avl | |
| W28-6B | wire ww etfe 28awg 2x50 red 28 awg 0.013"" (0.32mm) 50 (15.24m) ethylene tetrafluoroethylene (etfe) 0.023"" (0.58mm) red roll | cables wires | Avl | |
| HD99-1 | hardware kit m2.5 x 11mm sleeve hardware kit panel filler | boxes enclosures racks | Avl | |
| FP45A52 | panel front 4.5x5.2 for efp mod panel front efp module | boxes enclosures racks | Avl | |
| 169P84HT | pc board vt461 8.5x17 breadboard prepunched insulating 0.1"" (2.54mm) grid - - 0.042"" (1.07mm) 17.00"" l x 8.50"" w (431.8mm x 215.9mm) 0.062"" (1.57mm) 1/16" | prototyping products | Avl | |
| VMEBP05S00 | backplane vme j1/j2 5-slot mono 6u 5 vme j1/j2 0.800"" (20.32mm) | boxes enclosures racks | Avl | |
| 3662-2 | pc board contacts only 4.5x9.6 plugboard card edge 0.1"" (2.54mm) grid - 44 @ 0.156"" (3.96mm) 0.042"" (1.07mm) 9.60"" l x 4.50"" w (243.8mm x 114.3mm) 0.062"" (1.57mm) 1/16" | prototyping products | Avl | |
| 169P59-032 | pc board fr4 epoxyglass 6.0x17.0 breadboard prepunched insulating 0.1"" (2.54mm) grid - - 0.042"" (1.07mm) 17.00"" l x 6.00"" w (431.8mm x 152.4mm) 0.031"" (0.79mm) 1/32" | prototyping products | Avl | |
| AC160-84-2 | covers solid 16.98x4.93 cover - | boxes enclosures racks | Avl | |
| FP10B8HP-1 | panel front assy 6ux8hp cut-outs panel front pc board | boxes enclosures racks | Avl | |
| 85H48WE | pc board fr4 epoxy glass 4.8x8.5 breadboard prepunched insulating 0.1"" (2.54mm) grid - - 0.062"" (1.57mm) 8.50"" l x 4.80"" w (215.9mm x 121.9mm) 0.062"" (1.57mm) 1/16" | prototyping products | Avl | |
| CCK14P-90 | card cage kit w/plstc screw-in subrack kit 12.000"" l x 19.000"" w (304.80mm x 482.60mm) 3u = 5.250"" (133.35mm) 2.500"" ~ 4.500"" h x 9.600"" l (63.50mm ~ 114.30mm x 243.84mm) card guide aluminum | boxes enclosures racks | Avl | |
| FP12-9U | panel front kit 12hp/9u - - | boxes enclosures racks | Avl | |
| 5231312-07 | panel filler 3ux12hp assembly panel filler - | boxes enclosures racks | Avl | |
| R656-3 | conn edge 56cont wirewrap 0.025"" edge connectors prototyping board | prototyping products | Avl | |
| R32-M | pin sckt.042""holes lopro1000/pkg low-profile ic socket pin-wrap post 1/16"" boards with 0.042"" (1.07mm) diameter holes | prototyping products | Avl | |
| T46-5-9-C | terminal ww pressin long 100/pkg press-on terminal with sq. post 1/16"" boards with 0.042"" (1.07mm) diameter holes | prototyping products | Avl | |
| VMEBP12P11 | backplane vme j1/j2 12-slot mono 6u 12 vme j1/j2 0.800"" (20.32mm) | boxes enclosures racks | Avl | |
| 4617-4 | pc board ibm at/isa voltg/gndpln plugboard card edge 0.1"" (2.54mm) grid - 98 @ 0.1"" (2.54mm) 0.042"" (1.07mm) 13.25"" l x 4.50"" w (336.6mm x 114.3mm) 0.062"" (1.57mm) 1/16" | prototyping products | Avl | |
| EFP204A66 | mod efp 3ux2.05 for 4.5x6.5 pcb efp module pcb | boxes enclosures racks | Avl | |
| CCA18S-90 | card rack 6ux19x15.75 snap-in assembled subracks with card guides 15.750"" l x 19.000"" w (400.05mm x 482.60mm) 6u = 10.500"" (266.70mm) 7.750"" ~ 9.750"" h x 13.500"" l (196.85mm ~ 247.65mm x 342.90mm) card guide aluminum | boxes enclosures racks | Avl | |
| W30-10-66B | case instrument 3.0x10x6.6 alum case 10.000"" l x 3.000"" w (254.00mm x 76.20mm) 6.610"" (167.89mm) 30.0"" (194cm) cover included metal aluminum unpainted - card guides - - | boxes enclosures racks | Avl | |
| M6044-2-3 | l bracket cm90f95 series 6u - - | boxes enclosures racks | Avl | |
| BR19-10-1 | case guide m4424c5.19 module guide efp module | boxes enclosures racks | Avl | |
| HD97 | hdwr kit cck 160 220 280 340 400 - - | boxes enclosures racks | Avl | |
| 64P44WE | pc board .1 space fr4 4.5x6.5 breadboard prepunched insulating 0.1"" (2.54mm) grid - - 0.042"" (1.07mm) 6.50"" l x 4.50"" w (165.1mm x 114.3mm) 0.062"" (1.57mm) 1/16" | prototyping products | Avl | |
| R31-M | pin socket .055"" hole pkg/1000 socket pin 1/16"" boards with 0.055"" (1.4mm) diameter holes | prototyping products | Avl | |
| HD91 | kit hardware cpci for card racks hardware kit cpci | boxes enclosures racks | Avl | |
| CCK14S-90 | card rack kit 3ux19x12 snap-in subrack kit 12.000"" l x 19.000"" w (304.80mm x 482.60mm) 3u = 5.250"" (133.35mm) 2.500"" ~ 4.500"" h x 9.600"" l (63.50mm ~ 114.30mm x 243.84mm) card guide aluminum | boxes enclosures racks | Avl | |
| HA12 | handle for card rack 4.25"" grab handle with hardware card rack | boxes enclosures racks | Avl | |
| CCA10P-90 | card cage assembled 2ux12""d scrw assembled subracks with card guides 12.000"" l x 19.000"" w (304.80mm x 482.60mm) 2u = 3.500"" (88.90mm) 0.750"" ~ 2.750"" h x 6.500"" l (19.05mm ~ 69.85mm x 165.10mm) card guide aluminum | boxes enclosures racks | Avl | |
| CCK13F-H | card rack kit subrack kit 9.000"" l x 10.250"" w (228.60mm x 260.35mm) 3u = 5.250"" (133.35mm) 2.500"" ~ 4.500"" h x 6.500"" l (63.50mm ~ 114.30mm x 165.10mm) no card guide aluminum | boxes enclosures racks | Avl | |
| CCA220-3U-12 | subrack 3ux220 mm w/12 c.guides subrack frame 11.630"" l x 19.000"" w (295.40mm x 482.60mm) 3u = 5.250"" (133.35mm) 3.940"" h x 8.660"" l (100.08mm x 219.96mm) card guide aluminum | boxes enclosures racks | Avl | |
| CG3-160R | card guide 160mm red plastic polycarbonate snap-in mount 6.299"" (160.00mm) 0.062 ~ 0.090"" (1.57 ~ 2.29mm) cards | boxes enclosures racks | Avl | |
| 5250238-24 | extrusion rear non-emc 5.00"" extrusion rear adaptor plates insulation strips nut strips | boxes enclosures racks | Avl | |
| DP-6U | panel dress 6u x 1.10 subrack dress panel subrack 6u | boxes enclosures racks | Avl | |
| 8016-1 | pc board fr4 1-side pph 6.0x6.0 breadboard general purpose 0.1"" (2.54mm) grid pad per hole (round) - 0.042"" (1.07mm) 6.00"" l x 6.00"" w (152.4mm x 152.4mm) 0.062"" (1.57mm) 1/16" | prototyping products | Avl | |
| VME64E05P01 | backplane vme 64x5slot j1/j2/p0 6u 5 vme j1/j2/j0 0.800"" (20.32mm) | boxes enclosures racks | Avl | |
| T68A-M | terminal miniwrap tin 1000/pkg bifurcated miniwrap terminals with sq. post - t68a 1/16"" boards with 0.042"" (1.07mm) diameter holes | prototyping products | Avl | |
| CCA18M-90 | card rack 19x7x15.75 metal assembled subracks with card guides 15.750"" l x 19.000"" w (400.05mm x 482.60mm) 6u = 10.500"" (266.70mm) 7.750"" ~ 9.750"" h x 13.500"" l (196.85mm ~ 247.65mm x 342.90mm) card guide aluminum | boxes enclosures racks | Avl | |
| CCA18F | card rack 6ux19x15.75 frame only subrack frame 15.750"" l x 19.000"" w (400.05mm x 482.60mm) 6u = 10.500"" (266.70mm) 7.750"" ~ 9.750"" h x 13.500"" l (196.85mm ~ 247.65mm x 342.90mm) no card guide aluminum | boxes enclosures racks | Avl |
Guaranteed on-time Delivery
Customized Database
Over 5100 Manufacturers
Complete Purchasing Solutions
All Orders are Fulfilled in the U.S.A.
All shipments must comply with U.S.A export laws.
No exceptions.
The only independent distributor
with a NO CHINA SOURCING Pledge
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”.
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote