Submit a Quote for Connector Part Number NI-ENET-9481-4-CHANNEL-60-VDC-250-VRMS-SPST-ELECTROMECHANICAL-RELAY National Aerospace Standards Co

To purchase connector part number NI-ENET-9481-4-Channel-60-VDC-250-Vrms-SPST-Electromechanical-Relay, manufactured by National Aerospace Standards Co, with a part type of Data Acquisition Systems And Equipment, please fill out the form below. The description for this connector part is The Ni Enet-9481 Data Acquisition Device Includes Four Single-Pole Single-Throw (Spst) Sourcing Digital Output Channels Specifically Designed For Industrial And Control Applications. Each Output Channel Provides Access To A Form A Electromechanical Relay For Switching Signals Up To 30 Vdc (2 A), 60 Vdc (1 A), Or 250 Vac (2 A). Each Output Also Features An Led That Indicates The State Of That Channel. In Addition, Channel-To-Channel Isolation Protects Your System From High-Voltage Transients, Common-Mode Voltages, And Ground Loops. Ni Ethernet Data Acquisition (Daq) Ni Ethernet Daq Digital I/O Devices Combine Industry-Standard Ethernet Communication; Direct Sensor Connectivity; And The Flexibility Of Ni Labview Software For Remote Monitoring And Control Of Actuators, Such As Pumps, Valves, And Relays. With Built-In Signal Conditioning And Reliable Network Communication, Ni Ethernet Daq Devices Stream Data In Real Time For Easy-To-Use, High-Performance Remote Measurements And Control. Ni-Daqmx Measurement Services Software Each Enet-9481 Kit Includes Ni-Daqmx 8.9 Or Later. Ni-Daqmx Driver And Measurement Services Software Provides Easy-To-Use Configuration And Programming Interfaces With Features Such As The Daq Assistant And Automatic Code Generation To Help Reduce Development Time. Every Ni Ethernet Daq Device Also Includes A Copy Of Labview Signalexpress Le Software, So You Can Quickly Acquire, Analyze, And Present Data Without Programming. Application Software In Addition To Labview Signalexpress, Ni Ethernet Daq Devices Are Compatible With The Following Versions (Or Later) Of Ni Application Software: Labview 7.1?, Labwindowsö/Cvi 7.X, And Measurement Studio 7.X. Ni Ethernet Daq Devices Are Also Compatible With Ansi C/C++, C#, Visual Basic .Net, And Visual Basic 6.0. ? Ni-Daqmx 8.9 (And Later) Provides Support For Labview Versions 7.1, 8.2, 8.5, 8.6, And Later. The Mark Labwindows Is Used Under A License From Microsoft Corporation. Windows Is A Registered Trademark Of Microsoft Corporation In The United States And Other Countries.. A sales representative will contact you within 15 minutes of receiving the request.