Keithley Instruments is just one of the connector parts manufacturers that make up ASAP Components’ second-to-none inventory. Our catalog of connectors lists each part by part numbers such as 7169-MTC-3, 7036, 2001-SCAN, KPXI-CON-PXIREM, 7790 and part types like Test Equipment Accessories, Switching And Control Test Equ, Test Equipmentaccessories, Pci Extensions For Instrumenta, Data Acquisition Systems And E. Each part features a corresponding description. To experience how ASAP Components is changing the way business is done, submit an RFQ today.
| Part No | Part Type | Description | QTY | RFQ |
|---|---|---|---|---|
| 7169-MTC-3 | Test Equipment Accessories | model 7169-mtc-3 twisted-pair cable assembly terminated w/ 20-pin connector blocks, 3m (10ft) (for m | Avl | |
| 7036 | Switching And Control Test Equ | model 7036 single-pole relay card w/ 40 independent switches and a mass-terminated 96-pin connector | Avl | |
| 2001-SCAN | Test Equipmentaccessories | model 2001-scan 10-ch scanner card w/ 8 relay inputs and 2 solid-state inputs (for models 2000, 2001 | Avl | |
| KPXI-CON-PXIREM | Pci Extensions For Instrumenta | model kpxi-con-pxirem pci-to-pxi extension interface module for pxi chassis | Avl | |
| 7790 | Test Equipment Accessories | model 7037-dt extra connector board (for model 7037-d) | Avl | |
| CAB-1803 S | Test Equipment Accessories | model cab-1803/s shielded cable w/ 100-pin connectors, 3m (10ft) (for models das-1700/1800, kpci-180 | Avl | |
| KPCI-3160 | Data Acquisition Systems And E | model kpci-3160 96-ch, pci board w/ parallel digital i/o and a mass-terminated 100-pin connector | Avl | |
| 248-SHV | Test Equipment Accessories | model 248-shv high-voltage coax cable terminated w/ an shv female connector on both ends, 3m (10ft) | Avl | |
| CACC-2006 | Test Equipment Accessories | model cacc-2006 ribbon cable w/ 50-pin connectors, 2.4m (8ft) (for models erb-24, kpci-pio96, pio-96 | Avl | |
| 7015-C | Switching And Control Test Equ | model 7015-c quad 1x10 solid-state mux card w/ mass-terminated 96-pin connector (for models 7001 and | Avl | |
| Model-CAB-SSR-Ribbon-Cable-0 9m-3ft-for-Models-PIO-SS | Test Equipmentaccessories | the cab-ssr is a 3 foot ribbon cable that connects a pb-24sm baseboard to one of the 50-pin headers on a pio-ssr series board or kpci-pio96. | Avl | |
| CAB-1800 | Test Equipment Accessories | model cab-1800 cable w/ 100-pin connectors, 0.5m (1.5ft) (for models das-1700/1800, kpci-3160, kcpi- | Avl | |
| 7006-2 | Ieee 488 Gpib Solutions | model 7006-2 single shielded gpib cable, one feed through and one straight on connector, 2m (6.6 ft) | Avl | |
| KPXI-CON-PM-1 8G | Pci Extensions For Instrumenta | model kpxi-con-pm-1.8g 3u pxi system control module with pentium m 1.8ghz cpu, 512mb ram, 40gb hard | Avl | |
| 3723 | Switching And Control Test Equ | model 3723 dual 1+30, high speed, reed relay multiplexer card | Avl | |
| 7012-C | Switching And Control Test Equ | model 7012-c 4x10 matrix card w/ mass-terminated connector (for models 7001 and 7002) | Avl | |
| CS-846 | Test Equipment Accessories | model cs-846 eight-position connector with screw terminals for connection to test leads | Avl | |
| 7018-S | Switching And Control Test Equ | model 7018-s dual 1x14 mux card w/ detachable screw terminal connector (for models 7001 and 7002) | Avl | |
| 7013-C | Switching And Control Test Equ | model 7013-c isolated, 20-ch relay switch w/ mass-terminated connector (for models 7001 and 7002) | Avl | |
| C1800 | Test Equipment Accessories | model c1800 ribbon cable w/ female 37-pin d-sub connectors, 0.45 m (1.5ft) (for many plug-in board p | Avl | |
| PIO-SSR-120 | Data Acquisition Systems And E | model pio-ssr-120 120-ch, p24 ssr compatible, isa board w/ digital i/o | Avl | |
| 7011-C | Switching And Control Test Equ | model 7011-c quad 1x10 mux w/ mass-terminated connector (for models 7001 and 7002) | Avl | |
| 7703-306A | Test Equipment Accessories | model 7703-306a db50 male connector kit (solder cup) with shell | Avl | |
| CS-751 | Test Equipment Accessories | model cs-751 female to female, 3 lug triax connector (for model 2500, 6517a, 236, 237, 238) | Avl | |
| CS-631 | Test Equipment Accessories | model cs-631 3-lug male triax cable mount connector (for model sc-22 cable) | Avl | |
| Model-7071-8x12-General-Purpose-Matrix-Card-for-Models-707A-and-708 | Switching And Control Test Equ | the model 7071 general purpose matrix card is an 8x12 configuration that switches high, low, and guard at each of the 96 relay crosspoints. the eight rows are connected automatically to the general purpose analog backplane when the matrix card is installed into the 707a and 708a mainframe. this allows for easy expansion in 12 column increments and eliminates the requirement for wiring between cards. | Avl | |
| 7024-3 | Test Equipment Accessories | model 7024-3 low-noise triax cable terminated w/ 2-lug male triax connectors, 0.9m (3ft) (for models | Avl | |
| 7156-KIT | Test Equipment Accessories | model cs-458 interlock connector kit | Avl | |
| 7023 | Test Equipment Accessories | model 7023 2-lug female triax bulkhead connector (for models 6011, 7024) | Avl | |
| 7078-TRX-TBC | Test Equipment Accessories | model 7078-trx-tbc 3-lug female triax bulkhead connector w/cap | Avl | |
| 7020-DT | Test Equipment Accessories | boot rubber/nut tall bushing red | Avl | |
| 1507A | Test Equipment Accessories | model 1507a low-thermal input cable terminated w/ a model 1486 connector on one end and 2 copper spa | Avl | |
| S1805 | Test Equipment Accessories | model 2500int-sma sma connector (for model 2500int-x) | Avl | |
| Model-PIO-SSR-120-120-Ch-P24-SSR-Compatible-ISA-Board-w Digital-I O | Data Acquisition Systems And E | the pio-12, pio-24, pio-96j, and pio-ssr-120 allow up to 120 ttl/nmos/cmos-compatible digital i/o lines to be monitored or controlled by a computer with an isa bus slot. these boards are ideal for controlling relays and process automation. with the pio-24, pio-96j, and pio-ssr-120 you can directly drive solid-state relays. the pio-12 and pio-24 also provide access to the pc?s interrupt input and enable lines, and include connections to the pc's power supplies (¦5v, ¦12v). by using external solid-state relays, the pio-ssr-120 can control and sense voltages up to 280vac and vdc while maintaining 4000vrms of isolation. | Avl | |
| CS-449 | Test Equipment Accessories | model cs-449 interlock connector kit (for model 6517-ilc-3) | Avl | |
| KPXI-CON-PCIREM | Pci Extensions For Instrumenta | model kpxi-con-pcirem pci-to-pxi extension interface module for pci chassis | Avl | |
| CS-440 | Test Equipment Accessories | model cs-440 2-lug female bulkhead connector (for models 220, 263, fixtures) | Avl | |
| Model-7013-S-Isolated-20-Ch-Relay-Switch-w Screw-Terminals-for-Models-7001-and-700 | Switching And Control Test Equ | NA | Avl | |
| CS-400 | Test Equipment Accessories | model cs-400 db25 male solder cup (for models 213, c126-1 cable) | Avl | |
| S1803 | Test Equipment Accessories | model 213-con analog output connector (for model 213) | Avl | |
| PDISO-8 | Data Acquisition Systems And E | model pdiso-8 isolated, isa board w/ 8 digital inputs and 8 relay outputs | Avl | |
| Model-KPXI-RDI-8-16-8-Channel-Relay-Output-and-16-Isolated-Digital-Input-PXI-Module | Pci Extensions For Instrumenta | isolated digital communication is one of the most common requirements of a production test system because of the need to communicate with handlers, binning equipment, and user controls. keithley's digital i/o modules can also interact with racks of instruments to trigger events, start readings, and collect pass/fail results. digital triggering and response enables fast and reliable test results that are not dependent on the communication bus in use. for hybrid test applications using smart instruments and digital communication techniques, tests can be run with instruments on gpib, lxi, usb, or a serial bus without changing system performance. the model kpxi-rdi-8-16 combines eight general purpose relay outputs with 16 isolated digital inputs. this module can be used to handle a variety of ac and dc signals with improved reliability. the eight relays are rated to 120vac or 24vdc to include a variety of power switching applications. all the relays are nonlatching, form c, and the status of each relay output can be read back through software commands. the kdio-drvr driver package offers example programs, such as a startup application that performs basic functions and verifies board communication. also included is code creator, which lets users program with drop down menus and then displays the equivalent code in c. | Avl | |
| 7006-1 | Ieee 488 Gpib Solutions | model 7006-1 single shielded gpib cable, one feed through and one straight on connector, 1m (3.3 ft) | Avl | |
| 2000-MTC-2 | Test Equipment Accessories | model 2000-mtc-2 cable assembly w/ a 44-pin connector and one unterminated end, 2m (6.6ft) (for mode | Avl | |
| 7169-KIT | Test Equipment Accessories | model 7169-kit 20-pin, mass-terminated connector (for model 7169a) | Avl | |
| SC-9 | Test Equipment Accessories | model sc-9 low-noise coax cable without connectors, sold by the foot | Avl | |
| CDAS-2000 | Test Equipment Accessories | model cdas-2000 ribbon cable w/ 50-pin connectors, 0.6m (2ft) (for models das-20, das-1700/1800, das | Avl | |
| KPXI-CON-CM-1 3G | Pci Extensions For Instrumenta | model kpxi-con-cm-1.3g 3u pxi system control module with celeron m 1.3ghz cpu, 512mb ram, 40gb hard | Avl | |
| 213-CON | Test Equipment Accessories | conn,box mt,rcpt | Avl | |
| S1600 | Test Equipment Accessories | model s1600 shielded cable w/ 37-pin connectors, 0.5m (1.5ft) (for models das-16, das-1600/1400/1200 | Avl | |
| CAB-SSR | Test Equipmentaccessories | model cab-ssr ribbon cable, 0.9m (3ft) (for models pio-ssr) | Avl | |
| 2500INT-FC APC | Test Equipment Accessories | connect in line rcpt | Avl | |
| 7037-DT | Test Equipment Accessories | model 2500int-fc/apc fc/apc connector | Avl | |
| SC-22 | Test Equipment Accessories | model sc-22 low-noise triax cable without connectors, sold by the foot | Avl | |
| 7078-KIT | Test Equipment Accessories | model 7078-kit connector kit, 38-pin plug assembly w/ strain relief and 40 contacts (for models 7071 | Avl | |
| 7037-D | Switching And Control Test Equ | model 7037-d single-pole relay digital i/o card w/ 30 independent switches, 10 independent digital i | Avl | |
| 4803 | Test Equipment Accessories | model 4803 low-noise coax cable kit w/ 15m (50ft) of low-noise cable, 10 male bnc connectors, 5 fema | Avl | |
| 7019-C | Switching And Control Test Equ | model 7019-c 6-wire ohms matrix card w/ mass-terminated 96-pin connector (for models 7001 and 7002) | Avl | |
| 7013-S | Switching And Control Test Equ | model 7013-s isolated, 20-ch relay switch w/ screw terminals (for models 7001 and 7002) | Avl | |
| Model-7705-40-Ch-Single-Pole-Control-Module-for-Models-2700-2701-and-275 | Multimeters | the model 7705 plug-in module offers 40 channels of independent switching. these channels are designed to control power to the dut and switching loads. they can also directly control light indicators, relays, etc. | Avl | |
| 7789 | Test Equipment Accessories | model 7789 d-shell kit w/ 50-pin and 25-pin connectors | Avl | |
| Model-3740-32-channel-Isolated-Switch-Card | Switching And Control Test Equ | the model 3740 offers 28 general-purpose form c channels that are ideal for routing power or other control devices. for higher power applications of up to 7a, four additional high current form a channels are provided. | Avl | |
| CAB-1802 S | Test Equipment Accessories | model cab-1802/s shielded cable w/ 100-pin connectors, 1.8m (6ft) (for models das-1700/1800, kpci-18 | Avl | |
| 7025-10 | Test Equipment Accessories | model 7025-10 low-noise triax input cable w/ 1 unterminated end and 1 end terminated w/ a 2-lug male | Avl | |
| CACC-2000 | Test Equipment Accessories | model cacc-2000 ribbon cable w/ 50-pin connectors, 0.6m (2ft) (for models erb-24, kpci-pio96, pio-96 | Avl | |
| 7011-KIT-R | Test Equipment Accessories | model 7011-kit-r female 96-pin connector kit (for models 7011-c, 7012-c, 7013-c, 7015-c, 7018-c) | Avl | |
| 7164-KIT | Test Equipment Accessories | model 7164-kit 50-pin, mass-terminated connector (for models 7164-d, 7164-m, 7164-mtr) | Avl | |
| 2500INT-SMA | Test Equipment Accessories | boot rubber/nut short bushing bk | Avl | |
| 7024-10 | Test Equipment Accessories | model 7024-10 low-noise triax cable terminated w/ 2-lug male triax connectors, 3m (10ft) (for models | Avl | |
| 2107-30 | Test Equipment Accessories | model 2107-30 low-thermal input cable terminated w/ a lemo connector on one end and 4 copper spade l | Avl | |
| 7018-C | Switching And Control Test Equ | model 7018-c dual 1x14 mux card w/ mass-terminated 96-pin connector (for models 7001 and 7002) | Avl | |
| CS-458 | Test Equipment Accessories | straight plug cad od alum | Avl | |
| Model-7013-C-Isolated-20-Ch-Relay-Switch-w Mass-Terminated-Connector-for-Models-7001-and-700 | Switching And Control Test Equ | NA | Avl | |
| 7015-S | Switching And Control Test Equ | model 7015-s quad 1x10 solid-state mux card w/ detachable screw terminal connector (for models 7001 | Avl | |
| K1802 | Test Equipment Accessories | model 7156-kit 37-pin, mass-terminated connector | Avl | |
| CS-970 | Test Equipment Accessories | model cs-970 high-voltage bulkhead connector (for models 248, 248-shv cable) | Avl | |
| CONN-1800HC | Test Equipment Accessories | model 7020-dt extra connector board (for model 7020-d) | Avl | |
| 7011-MTR | Test Equipment Accessories | model 7011-mtr bulkhead-mount 96-pin male connector (for models 7011-kit-r, 7011-c, 7012-c, 7013-c, | Avl | |
| 7709-308A | Test Equipment Accessories | model s1803 shielded cable w/ db37 connectors, 1.2m (4.5ft) | Avl | |
| 2500INT-FC PC | Test Equipment Accessories | model 2500int-fc/pc fc/pc connector (for model 2500int-x) | Avl | |
| CONN-3160-D1 | Test Equipment Accessories | model conn-3160-d1 100-pin to 4x50 pin adapter (for model kpci-3160) | Avl | |
| CAB-1800 S | Test Equipment Accessories | model cab-1800/s shielded cable w/ 100-pin connectors, 0.5m (1.5ft) (for models das-1700/1800, kpci- | Avl | |
| 7158 | Switching And Control Test Equ | model 7158 10-ch, low-current scanner card w/ bnc connectors (for models 7001 and 7002) | Avl | |
| C-16MB1 | Test Equipment Accessories | model c-16mb1 ribbon cable w/ 37-pin and 26-pin connectors, 0.5m (1.5ft) (for models das-1700/1800, | Avl | |
| Model-3723-Dual-1 30-High-Speed-Reed-Relay-Multiplexer-Card | Switching And Control Test Equ | the model 3723 offers two independent banks of high speed 1x30 two-pole multiplexers that are ideal for high speed scanning applications. the two banks can automatically be connected to the series 3700 mainframe backplane and optional dmm through the analog backplane connection relays. this connection allows the mainframe to reconfigure the model 3723 as a single 1x60 twopole multiplexer or as a single 1x120 single-pole multiplexer. it also enables card-to-card expansion for even larger configurations. | Avl | |
| CACC-2002 | Test Equipment Accessories | model cacc-2002 ribbon cable w/ 50-pin connectors, 1.2m (4ft) (for models erb-24, kpci-pio96, pio-96 | Avl | |
| 2182-KIT | Test Equipment Accessories | model 2182-kit low-thermal (lemo) connector w/ strain relief (for model 2182) | Avl | |
| 2107-4 | Test Equipment Accessories | model 2107-4 low-thermal input cables terminated w/ a lemo connector on one end and 4 copper spade l | Avl | |
| KPXI-RDI-8-16 | Pci Extensions For Instrumenta | model kpxi-rdi-8-16 8-channel relay output and 16 isolated digital input pxi module | Avl | |
| Model-PDISO-8-Isolated-ISA-Board-w 8-Digital-Inputs-and-8-Relay-Outputs | Data Acquisition Systems And E | the pdiso-8 is a low-cost 8-channel isolated input/output interface board designed for control and sensing applications. the pdiso-8 provides eight electromechanical relay outputs and eight optically isolated inputs, so you can both load (send) and sense signals. the pdiso-8 can be used in various applications including load switching, external-switch sensing, contact closure, and external-voltage sensing. this interface board is easily installed in any isa-bus compatible computer. | Avl |
Guaranteed on-time Delivery
Customized Database
Over 5100 Manufacturers
Complete Purchasing Solutions
All Orders are Fulfilled in the U.S.A.
All shipments must comply with U.S.A export laws.
No exceptions.
The only independent distributor
with a NO CHINA SOURCING Pledge
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”.
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote